...

• we think gpu can write to kcu, but Jeremy will try to confirm that this is really the case.  we think kcu to gpu is broken.
• Mudit will work on TDet firmware
• Jeremy and TID will use rdsrv419
• LCLS should find another machine where we can control the root-complex topology better.  lab3 daq-tst-dev06?
  • could be that the CPU datadev driver is incompatible with the GPU datadev driver
  • should probably find a different machine.  a fee-alcove machine?
• chris and gabriel on vacation July 6-20
• Jeremy unavailable July 8-10

July 8, 2024

• Jeremy and CPO are on vacation
• Larry urges to move axi-stream-drivers forward to v4.1.0 rather than working with v4.0.0
  • Mudit has created v4.2.0 (CPU/GPU DMA switch?) but it has not been tested with hardware yet
  • It is unclear whether Jeremy has gotten a baseline working system yet
• Ryan agreed that my hacks of test_dma.cu and _Root.py to target/dev/datagpu_1 should be sufficient
• Ryan would like us all to work on one machine and get confidence in it before we branch out to different machines
• I suggested that we could pull out the current /dev/datagpu_0 from dev06 so that the KCU of interest becomes _0
  • Ryan & Larry suggested pullling the other ones out as well
• Ryan suggests setting iommu=no in the BIOS as well as on the command line
  • I later found that there is no iommu parameter in dev06's BIOS
• There's no experience with multiple KCU cards and the datagpu driver - it is untested
  • Larry is aware of some issue with the usual datadev driver and multiple KCUs
• Work on rdsrv419
  • A GPU is installed
  • CUDA is installed
  • A KCU is installed and has PCIe slot 03:00