| Description | Priority | Assigned to | Design | Tested | When will it be done. | Date completed | Notes |
|---|
- Analog board power supplies not powering up.
| High | Scott/Dionisio | Done |
|
|
| The missing connection on the power planes have been identified by Scott and implemented in the C01 design files. A new board spin is required. |
| Medium | Dionisio/Tung | Done | Done |
| 10/2023 | Need to change the fab notes to make board more flexible. If needed we will change the planes from solid to criss-cross pattern |
- Carrier board copper plate opening is too narrow
| Medium | Marco | Done | Done |
|
| Marco has changed the design file to increase the opening and requested the tech to rework all existing copper carriers |
- Component heights to not match pockets in the cooling block
| Medium | Marco |
|
|
|
| Scott found some components hight did not match the needs. Marco is working with Don to get this fixed |
- Mounting holes on cooling block have wrong size
| High | Marco |
|
|
|
| Mounting hole on the cooling block are larger than in the board. This prevents us from securing the boards. |
- Mounting holes on cooling block have wrong size
| Medium | Dawood |
|
|
|
| Initialization files only work if the project (python ./devGui.py) is executed in the script folder. How can we make it more consistent and enable the project to be ran from other locations |
| Medium | Dionisio |
|
|
|
| We need to enable the configuration files to be done for all asics individually |
- Timing receiver not locking
| High | Dawood/Julian |
|
|
|
| Check why timing receiver is not locking |
| Medium | Dawood | Done |
|
|
| Port and change data descrambler form 2x1 to 2x4 |
- Initialization for 5kfps (12us/24us)
|
|
|
|
|
|
|
|
- Initialization for charge injection (24us/150us)
|
|
|
|
|
|
|
|
