Page History

...

1. Block the laser.
2. Go to laser room and rotate an ND2 filter in the filter wheel in.
3. Park e-beam.

4. Move the target mount into the field of view of the FrontView camera. This will be around 

   Motor	position
   Target mount horizontal	-120 mm
   Target mount vertical	-20 mm

5. Flip front view blue glass filter IN (Beckhof → E:03 IN=IN )
6. Release e-beam.
7. Measure location of the beam. Write it down and use a line out. Don't take a new Beam mark.
8. Park the e-beam
9. Flip front view blue glass filter OUT
10. Close laser iris
11. Release the laser
12. Use M1 to center hole on laser circle, use M2 to align to e-beam location
13. Confirm alignment with electron beam
14. park e-beam, block laser

15. Move axilens IN

    Motor	position
    Lens horizontal	~ 8.3 mm
    lens vertical	~ 8.05 mm

16. Unblock laser and confirm alignment to beam reference

17. Drive foil OUT

    
    

    Motor	position
    Target mount horizontal	-150 mm
    Target mount vertical	-20 mm

18. Go to laser room and take out ND2 filter from filter wheel.
19. E-beam and laser con now be released.

...