...
Testing HDF5 DAQ
- take a DAQ with HDF5, simple DAQ, 20 shots, 1 camera (LBG_LFOV)
- all 20 shots saved
- test with 1000 shots
- saved 999 shots
- took a little over 2 minutes
- add more cameras (LBG_LFOV, EOS2, GAMMA1)
- saved 993 shots for each camera
- ~2 min 10 seconds in total
- try streaming
- 1000 shots
- failed TEST 7480
- try streaming but with 10 shots
- success with all matches
- try streaming with 200 shots
- success with 197 matches
- try streaming with 700 shots
- says DAQ failed on step 1 but 641 matches
- try streaming with TIFF, 700 shots
- saved 155 matches
- took a little more than 3 minutes
- try a 1D scan, 10 shots, 3 steps
- did not restore to initial value
- Spec_Quad_E
- 28 matches
- trying a 2D scan, 10 x 2 x 2
- saved 40 shots
- trying 2D scan with streaming
- saved 40 shots
- try to open HDF5 images in DAN
- error when "Plot Correlation" button pushed, expecting a TIFF image
- Error in hlpGetImage with “imgType”
Bugs and Robustness
| Issue | Person | Priority | Status | Notes |
|---|---|---|---|---|
| Background not being saved | Sharon | High | DONE | |
| Not saving non BSA data and getting F2_EventClass error | Sharon | High | This is caused by a PV in a list being down | |
| Implement HDF5 file saving for images | Sharon | High | Testing | |
| N/A | ||||
| Calculate how much space on disk is required | High | |||
| Install 10G switch and NAS in S10 | Arjun | High | Planning | |
| Check what happens if new DAQ is started before old one is finished (failed abort) | High | |||
| Fix binning and ROI for CMOS cameras | Medium | |||
| Can't get magnet values on first DAQ? | Medium | |||
| Check that the beam rate is not equal zero if rate set to "BEAM" | Spencer | Medium | ||
| Fix "Use_PV" functionality. | Sharon | Medium | DONE | |
| Fix camera triggers if DAQ fails. | Sharon | High | DONE | |
| "Fix cameras" button disabled if DAQ hasnt run yet | Sharon | Medium | DONE | |
| "Fix cameras" button should use default values? - yes | Sharon | Medium | DONE | |
| Timestamping fails on certain ROI settings? | Spencer | High | DONE | |
| Upgrade all machines in S20 to 10G connection | Spencer | Medium | DONE | |
| Camera binning messes up pulse ID finding | Spencer | Medium | DONE |
Feature requests
| Issue | Person | Priority | Status |
|---|---|---|---|
| Add check/remove bad PVs and notify user in an obvious way | Sharon | ||
| Add nonBSA arrays so we can get UV spectrometer (Claudio request) | Sharon | High | WIP |
| DAQ Monitor GUI | Sharon | High | DONE |
| Find a way to globally trigger a modifier bit (e.g. "DUMP_2_9"). | David | ||
| Scan function that pauses until you click 'ok' | |||
| Generate "camera config" file including trigger info and add a save/restore button. Monitor if this finished ok or not. | Sharon | ||
| Load/Save Config files. Default config files. | Claire | ||
| Robustness issues. . . | Spencer | High | In progress |
| DAN features | Sharon | ||
| Documentation/commenting | Spencer | High | In progress |
| Fix "Use_PV" functionality. | Sharon | Medium | DONE |
...