...

then you can just run mypy by hand and play with it

Epix at UED

UED is the ultrafast electron diffraction facility which uses a small accelerator and instrument housed in building 40.  The timing system is LCLS2 style with the following exceptions:

• the base clock is 119 MHz instead of 185.7 MHz
• the timing frame rate is 500kHz instead of 930kHz
• the beam is generated on AC aligned triggers exclusively up to 1080 Hz

Image Added

The ATCA shelf manager for the timing crate is accessed via testfac-srv01.  Also, drp-ued-cmp001 has a private ethernet interface connected to the ATCA ethernet switch for the purpose of running the XPM software.  The ePix 10ka quad is hosted by the Kcu1500 card in drp-ued-cmp001.  The timing segment level is hosted by the Kcu1500 in drp-ued-cmp002.  Because the timing clocks and frame rates are different than LCLS2, the software requires special flags to configure the timing receivers with LCLS1 clock frequency and LCLS2 protocol decoding.

360 Hz capable EpixQuad

Kcu1500 on drp-ued-cmp001 with firmware image
         Build String : Lcls2XilinxKcu1500Pgp4_6Gbps_ddr: Vivado v2021.2, rdsrv300 (Ubuntu 20.04.1 LTS), Built Fri 18 Mar 2022 11:26:34 AM PDT by weaver

...