...
| Code Block |
|---|
knoppix@0[~]$ sudo customize.NPtools
Internet2 Network Performance Tool Customization script
Tools listed in RED need to be customized
1. Setup Drive(s) to hold customization files
2. bwctl
3. ndt
4. npad
5. ntp
6. owamp
7. staticIP
0. exit
6
OWAMP server configuration program.
Manual configuration is currently required. Please edit the
/usr/local/etc/owampd.conf and /usr/local/etc/owampd.limits files
to create custom versions for your site.
See http://e2epi.internet2.edu/owamp for more details.
|
Static IP Address
Can be configured from the customize tool. However, i will leave it for now until the machine is installed.
| Code Block |
|---|
knoppix@0[~]$ customize.NPtools
Internet2 Network Performance Tool Customization script
Tools listed in RED need to be customized
1. Setup Drive(s) to hold customization files
2. bwctl
3. ndt
4. npad
5. ntp
6. owamp
7. staticIP
0. exit
7
Welcome to the NPToolkit server Static IP configuration program. This
program will prompt you for the necessary information for your site.
Use Static IP addresses or DHCP [static] :
Enter your IP address [192.168.1.99] :
Enter your Netmask value [255.255.255.0] :
Enter your gateway's IP address [192.168.1.1] :
Enter the network interface identifer [eth0] :
Enter your nameserver's IP address (3 max, blank line to exit early) :
mount: only root can do that
mount: only root can do that
Static IP customization files are being saved to 'sdb1'
Do you want to start this interface? [Yes] :
|
Reboot
Let's reboot to see if things stick...
...