Page History
...
| Code Block |
|---|
daq-tmo-hsd-01:~$ lspci | grep -i slac 1a:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 1b:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 3d:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 3e:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 5e:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 (not working because had non-daq firmware) 88:00.0 PerformanceMemory counterscontroller: SLAC National Accelerator Lab TID-AIR AXI Stream DAQ PCIe card (not working because had non-daq firmware) Device 2100 89:00.0 PerformanceMemory counterscontroller: SLAC National Accelerator Lab TID-AIR AXI Stream DAQ PCIe cardDevice 2100 b1:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 b2:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 da:00.0 Memory controller: SLAC National Accelerator Lab TID-AIR Device 2100 daq-tmo-hsd-01:~$ |
2 hsd cards can talk to 1 data card, and each data card has 4 LR4 transceivers (2 per hsd-card). hsd card has a "mezzanine" component with analog input connectors, and a JESD connection through the usual xilinx MGT (serial connection) to a pcie carrier card. There is a cable (small coax cables that Matt says have failed in the past) that connects the hsd card(s) (up to two) to the data card. The FPGA is on the hsd pcie carrier card.
...
Overview
Content Tools