Meeting Minutes: 

• Alex presented a summary of bibliography. Presentation can be found in the shared folder here:Image ModifiedPoF_Shared_Folder

• Sander presented about laser safety. Presentation in shared folder

• Laser safety takes approx. 4 months. We need to start asap

• The cryo measurement has been done by DUNE, what is our target? 
• DUNE group at FNAL has favored connection with Broadcom, for customized products for cryo.
• MSU and CU reached out to James about the status of the project.
• We can lend setups to partners. One Broadcom setup is around 2k

Next Steps: 

• Sketch of lab space in 113 (James) 
• Ask Ryan about Lab space in building 84 (Sander) 
• Contact Mike Wooks for a meeting (Sander) 
• Redefine Scientific goals (everybody) 
  • Verify if it can power 1 reticle (min) and 16 reticles (max) (Alex) 
• Contact DUNE at FNAL (Sander) 
• Can we/ Will we take a SULI Student? (Caterina) 
• Draft of PCB board (Pietro) 

Meeting Minutes: 

• Marty talked to Michael Woods (Laser Safet Officer at SLAC), and he seems understanding of our need. General recommendations: laser always connected to a receiver, laser in a box,...?
• Mengqing at Nikhef has a set of lasers. A possible collaborator.
• Sander has been to the laser safety event at Stanford.
• We need to think about the system level for safety, and for practical reasons (where to dissipate power in a power-pulsed system). We either have to control the laser, or tune it to deliver the 'average' power that is stored on a capacitor, and regulated with an LDO
• We need to start with a generic system, with LDO, and a set of variable loads (resistors) with a way to monitor the ouput voltage and current, to characterize the system before connectiong it to any real load (ASICS, SiPM).

To Do list:

• Start ES&H Process on laser safety (Sander)
• Literature study on solutions/competitions (Alex)
• create a list of possible laser and diode providers (Alex and James)
• Concept design of PoF board (Pietro)
• Start setting up a lab space (James)
• Reach out to collaborators, with a potential meeting before winter break (Sander and James)
• Keep an eye for relevant talks at CPAD and NSS (everybody)