Page History
...
XPM firmware 3.6.0
Opal config does not have xpm mini -timing2 hack
cnf file uses -D fakecam for additional timing nodes
in 2023/11/14
| action | issue found | stat | remedy |
|---|---|---|---|
| stop pyxpm 10 and 11 fru-deactivate and activate xpm 11 restart pyxpm 10 and 11 start DAQ | bucket issue | 1/10 | rebooting timing node cmp001 |
| rebooting timing node cmp001 | no issue | 0/5 | |
remove fiber from xpm10 to xpm11 fiber 5 times | no issue | 0/5 | |
Removing fiber from xpm10 to timing 1 fiber 5 times for 5 seconds (Amc1 port0) | no issue | 0/5 | |
Removing fiber from xpm11 to opal fiber 5 times for 5 seconds (Amc1 port1) | no issue | 0/5 |
in 2023/10/30
| action | issue found | stat | remedy |
|---|---|---|---|
stop pyxpm 10 and 11 | 9/20 | --- | |
stop pyxpm 10 and 11 | Opal fails in configuration | 5/20 | reboot timing nodes |
stop pyxpm 10 and 11 | groupca and xpmpva are shutdown at startup | 4/20 | ctrl-x in the terminal successfully restart them |
...
Overview
Content Tools