Page History
...
These are the results of the tests that have been conducted in the FEE alcove to determine if the XPM glitch can be reproduced.
Every test is run from a starting behavior where the DAQ can allocate, configure, run, and disable.
Whenever the DAQ does not follow the starting behavior remedies are applied to recover it.
XPM firmware 3.6.0
Opal config does not have xpm mini -timing2 hack
cnf file uses -D fakecam for additional timing nodes
in 2023/10/30
action | issue found | stat | remedy |
---|---|---|---|
stop pyxpm 10 and 11 | 9/20 | --- | |
stop pyxpm 10 and 11 | Opal fails in configuration | 5/20 | reboot timing nodes |
stop pyxpm 10 and 11 | groupca and xpmpva are shutdown at startup | 4/20 | ctrl-x in the terminal successfully restart them |
example of the timing shift in the timing nodes (before -D fakecam).
XPM firmware 3.5.4
Opal_config.py still has xpm mini – timing2 hack
...