Page History

...

The serial number is of the form epixhremu_00cafe0000-0000000000-0000000000-0000000000-0000000000-0000000000-0000000000, where the 4 zeros after 'cafe' are replaced with the segment number, i.e. ...00cafe0000... through ...00cafe0013.... 

Data

To emulate a similar data bandwidth as expected from the real detector, the TDetSim sim_length parameter was set to 55292, corresponding to 221 kB of pixel data.  This matches the panel size of 144 by 192 by 4 ASICs times 2 bytes per pixel, 221184 bytes.

The data passed downstream is provided by an XTC file of existing data.  This file is specified on the DRP command line through an xtcfile keyword argument.  In case the file contains some junk events, an l1aOffset kwarg can be used to skip past the first N events in the file.  The substitute data is further indexed by the segment number, multiplied by the number of lanes in use, to avoid passing the same data for each panel.

The data files we currently (9/1/23) have available were recorded during the EpixHR2x2 testing.  This detector had only one panel sort-of working, which was handled by ASIC 0.  A file that had some somewhat varying data in it was rixx1003721-r0106-s010-c000.xtc2.  For the emulated data (which is either 4 or 8 panels, depending on the lane mask), each panel is given ASIC 0 data from a different event.  Thus all emulated events have  identical data.

Python detector interface

With the above data was recorded and the detector interface was developed.  From this we see events like the following in the data files:

DrpPython