Page History
...
- Using Altium Designer
- Multi-board project: https://stanford-linear-accelerator-center.365.altium.com/designs/5186839B-3CA3-4D54-8947-817E5400B729#design
- Digital board: https://stanford-linear-accelerator-center.365.altium.com/designs/15351422-ADCD-4239-875B-3D8D5E0BD347#design
- Analog board: https://stanford-linear-accelerator-center.365.altium.com/designs/40A8ABB0-467C-443B-B76D-D732550EB38A#design
- Based mechanically on the boards from ePixHR250M_2x2_Camera_Documentation
- Changes done to the system architecture compared to the boards in the camera above:
- The digital board with the FPGA will be moved to the bottom of the stack with the optical transceiver
- The analog board is at the top and interfaces between the carrier and the digital board
- Naming:
- NNN-single-carrier
- NNN-single-digital
- NNN-single-analog
Where NNN is the "brand name" of this system, suggestions:- Chipmunk
- ePix-gt
- GigaPlus
- GTplus
General questions
- Common SACI (ASIC slow control) interface for the "old" carrier boards with separate select signals
- Still use common or split up into one SACI per ASIC?
- Other common signals: CLK_EN, GRST, ACQ, RO, SRO, SYNC
- Which board should have the power connector?
| Anchor | ||||
|---|---|---|---|---|
|
...
| Expand |
|---|
DC/DC
Connectors:
FPGA:
Thermistor, humidity:
AD/DA:
ID:
Optical:
Memory:
Oscillator/clock:
Level-shifters:
|
are available from the Altium Manufacturer Part Search catalog with symbol and footprint
have been created in a temporary library (schematic symbol only) which should be integrated into the OneDrive library at some point...
Overview
Content Tools