...

Martin Ellguth of Surface Concept recompiled some libraries for us:

Hi Matt,

I prepared a Docker image based on a Ubuntu 20.04 LTS image, compiled gcc-12.1.0 from sources and used it to build the following archives:

www.surface-concept.com/downloads/software/2022/tmp/scTDC1_ubuntu2004_gcc12_v1.3017.5.tar.gz
www.surface-concept.com/downloads/software/2022/tmp/scTDC1_devclass45_ubuntu2004_gcc12_v0.3.82.tar.gz

The second link is the "device class" library needed for TDCs with an Ethernet port.

Mit freundlichen Grüßen / Best Regards

Dr. Martin Ellguth

...

quynh works with silke/cpo on analysis

Hardware

Front side elex.  The simulator is shown on top.  The simulator is powered via a USB connector.  It receives a start pulse and then simulates the TDC output and transmits it via its rear HDMI connector.

Image Added

Back side elex.  The TDC output from the simulator attaches to the HDMI TDC input on the front of the main chassis.  The fiber timing signal from an XPM attaches to the PulseID input of the main chassis.  Two ethernet connectors provide control and data.

Image Added

Inside view.

Image Added