...
- Restart the IOC. Run "imgr ioc-mec-streak-0${X} --enable" (with ${X} set to either "1" or "2"). The full visar application should start on the PC.
- Once the IOC has completely started, pull up the edm screen by running "camViewer -m -c Streak_${X}" (with ${X} set to either "1" or "2").
- Hit the acquire "Start" button on the edm screen. The PC should open an updating image display window and the image counter on the edm screen should start to increase. If this doesn't happen, see the trouble shooting guide below. (If the window does not open on the PC, check the synchronization options. If the window opens and the image updates but the counter doesn't change, check the scan mode and acquisition options.)
...