Page History
...
NOTE: when changing running modes, always disable acquisition by hitting the "Stop" button in the "Image Collection" section of the main IOC window, then "Start" after all changes have been made.
The You can turn on crop from the expert screen setting "crop mode" to enable. The underlying PV for turning this mode on/off is: RIXRIX:DIR:CAM:01:AndorIsolatedCropMode
...
Trigger Rate | 3MHz | 1MHz |
120 Hz | 90x90 | 50x50 |
60 Hz | 155x155 | 85x85 |
30 Hz | 255x255 | 140x140 |
10 Hz | 470x470 | 275x275 |
Combining Crop Mode and Partial Vertical Binning
May 8, 2023. Following a request from Kristjan Kunnus, Dan and Kristjan tried running the andor with a combination of crop mode and partial vertical binning with these settings. It appeared to work and run at 10Hz, but it needs to be tested with x-rays on the detector to verify that it works.
Miscellaneous Thoughts on running the Newton Camera
...