...
- meclas.LPL.psmenu(): this command gives you a list of recipes to choose from
- Type in the recipe from the menu list, for example, l56 == "U10ns00gradE100J"
- meclas.LPL.psefc10Hz(numIterQ=150): run this command you will shape the 10Hz pulse as designed. It's a feedback loop and numIterQ = x tells it to run x times of iteration. The lower left figure shows all the parameters you can set. The lower right figure shows the 10Hz pulse (blue) and designed shape (red). For more detail please check how to make a new recipe.
Open the beam monitor cameras cameras
Check alignment
Optimize SHG and HWP
...