Page History

...

For BIOS v2.3, the parameters on the Advanced tab that needed restoring were:

• Boot Feature:
  • Restore on AC Power Loss:      Stay Off
  Boot Feature:
  • Power Button Function:            4 Seconds Override
• CPU Configuration:
  • SMT Control:                             Disabled
• PCI... Config.:
  • ... Slot 1 ... Bifurcation (note: "page down" to see this):   x8x8
• Supermicro ... Enet Ctrlr A:
  • DevCfgMenu:
    • Number of VFs per PF:     8
  Supermicro ... Enet Ctrlr A: DevCfgMenu:
  • • Energy Eff. Enet:               Disabled
  Supermicro ... Enet Ctrlr A: DevCfgMenu:
  • • DCB Protocol:                   Enabled (IEEE Only)
  Supermicro ... Enet Ctrlr A:
  • MBACfgMenu:
    • Legacy Boot Protocol:     PXE
  Supermicro ... Enet Ctrlr A: MBACfgMenu:
  • • Pre-boot Wake On LAN:  Enabled
• Supermicro ... Enet Ctrlr B:
  • DevCfgMenu:
    • Number of VFs per PF:     8
  Supermicro ... Enet Ctrlr B: DevCfgMenu:
  • • Energy Eff. Enet:               Disabled
  Supermicro ... Enet Ctrlr B: DevCfgMenu:
  • • DCB Protocol:                   Enabled (IEEE Only)
  Supermicro ... Enet Ctrlr B:
  • MBACfgMenu:
    • Legacy Boot Protocol:    PXE
  Supermicro ... Enet Ctrlr B: MBACfgMenu:
  • • Pre-boot Wake On LAN: Enabled

In addition, the Boot options on the Boot tab need to be modified.  Easiest may be to first go into 'UEFI NETWORK Drive BBS Priorities' (probably need to scroll to the bottom) and move the IB option to be last.  Then go back to the Boot options and change the options to:

...