Page History
...
NOTE: the rightmost MPO connections are MPO12 (2 rows, 4 columns). The left ones are MPO8. We should use MPO8 for KCU. The MPO12 are reserved for "future expansion" (can be converted to MPO8, I think).
1: cmp031(close to usb port) | DON'USE FOR NOW | DON'T USE FOR NOW | (breakout cable) 1: cmp022(away from USB port) 2: cmp022(close to USB port) 3: cmp023 (away from USB port) 4: cmp023 (close to USB port) | (breakout cable) 1: cmp018(away from USB port) 2: cmp018(close to USB port) 3: cmp019 (away from USB port) 4: cmp019 (close to USB port) | (breakout cable) 1: cmp009(away from USB port) 2: cmp009(close to USB port) 3: cmp017 (away from USB port) 4: cmp017 (close to USB port) | (breakout cable) 1: cmp008 2: cmp010 3: cmp016 4: cmp025 | |||||
(breakout cable) 1: cmp024(away from USB port) 2: cmp024(close to USB port) 3: - 4: - | (breakout cable) 1: cmp020(away from USB port) 2: cmp020(close to USB port) 3: cmp021 (away from USB port) 4: cmp021 (close to USB port) | (breakout cable) 1: cmp029 2: cmp030 3: cmp032 4: - | (breakout cable) 1: cmp028 2: - 3: - 4: - | ||||||||
...
See FEE Alcove Fiber Cabling for description of which patch panel in 208 goes to which detector. Note that the fiber numbering on that page is different from here. On the FEE alcove page we number fibers left-to-right, then top-to-bottom. Here we use a better scheme: using the actual fiber numbers marked on the cassettes. We should convert the FEE-alcove page to use the better fiber-numbering scheme.
Source | Destination | Notes |
---|---|---|
ATCA FEE router port 0 | ATCA room 208 router port 1 | 10Gb network to SRCF node, the connection is done via the octopus fiber #4 |
room 208 ATCA crate switch optical fiber port 0 | SRCF LC cassette 4 (counting from 1, left to right) fibers 11/12 | 10Gb network to SRCF node (drp-srcf-cmp004?) |
TMO XPM 2 network connection (TMO FODU 1, Cassette 4 fibers 5-6) | ATCA switch optical port 7 counting from 0 | needed to swap tx/rx fibers to get link-lock |
RIX XPM 3 network connection (RIX FODU, cassette 1, fibers 15-16) | ATCA switch optical port 6 counting from 0 | |
Mono Encoder Network | From FEE Fodu 1 cassette 3 fibers 1,2 to SRCF LC fodu fibers 21,22 | |
Timing output of XPM2 in 208 | TMO FODU 1, Cassette 3, Fibers 17-18: 1.3.17-18 | Cassette 1 is missing |
Timing output of XPM3 in 208 | RIX FODU 1, Cassette 1, Fibers 7-8: 1.1.7-8 | |
XPM0-AMC0-PORT0 | RIX 1.1.3-4 | This is XPM0 → XPM3 in RIX, FODU 1 for RIX is FODU 5 in 208 |
XPM0-AMC0-PORT1 | TMO 2.4.3-4 | This is XPM0 → XPM2 in TMO, FODU 2 for TMO is FODU 7 in 208 |
XPM5-AMC0-PORT0 | RIX 1.1.3-4 | This is XPM3→ XPM5 |
XPM6-AMC0-PORT0 | TMO 1.3.17-18 | This is XPM2→ XPM6 |
XPM0-AMC1-PORT0 | FEE FODU 1, Cassette 4 fiber 11-12 (top right) | LCLS2 timing for FEE Teststand |
TMO ATM CAMLINK | TMO FODU 1 cassette 3 fiber 1-2 (a.k.a. TMO1.3.1-2) | cassette 1 is missing, swapped tx/rx at bos |
RIX FIM MR4K2 | RIX FODU 1 cassette 1 fibers 25-26 (a.k.a RIX1.1.25-26) | |
RIX FIM MR3K2 | RIX1.1.27-28 | |
RIX FIM CHEMRIX | RIX1.1.29-30 | |
TMO FIM1 | TMO1.3.5-6 | Not sure which FIM this really corresponds to in TMO |
TMO FIM2 | TMO1.3.7-8 | Not sure which FIM this really corresponds to in TMO |
RIX HSD2 | RIX1.1.19-20 | I may be swapping hsd2/3 (this was FEE fodu 1.3.18, old numbering scheme) |
RIX HSD3 | RIX1.1.23-24 | I may be swapping hsd2/3 (this was FEE fodu 1.3.15, old numbering scheme) |
TMO CAMLINK OPAL1 | TMO1.4.1-2 | swapped tx/rx at bos |
TMO CAMLINK OPAL2 | TMO1.3.3-4 | swapped tx/rx at bos |
TMO CAMLINK FZP | TMO1.2.11-12 | swapped tx/rx at bos |
RIX CAMLINK ATM | RIX1.3.13-14 | |
TMO HSD3 or companion | TMO1.4.13-14 | I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.11 (old numbering scheme). Needed tx/rx swap at bos. |
TMO HSD3 or companion | TMO1.4.15-16 | I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.9 (old numbering scheme). Needed tx/rx swap at bos. |
TMO HSD5 or HSD7 | TMO1.4.31-32 | I may be swapping hsd5/hsd7. This one was in fee fodu 1.1.1 (old numbering scheme). Needed tx/rx swap at bos. |
TMO HSD5 or HSD7 | TMO1.4.29-30 | I may be swapping hsd5/hsd7. This one was in fee fodu 1.1.5 (old numbering scheme). Needed tx/rx swap at bos. |
TMO HSD4 | TMO1.4.27-28 | Was in fee fodu 1.1.4 (old numbering scheme). tx/rx swap at bos. |
TMO HSD4 companion | TMO1.4.33-34 | Was in fee fodu 1.1.6 (old numbering scheme). tx/rx swap at bos. |
TMO HSD1 | TMO1.4.17-18 | Was in fee fodu 1.1.12 (old numbering scheme). tx/rx swap at bos. |
TMO HSD2 | TMO1.4.19-20 | Was in fee fodu 1.1.8 (old numbering scheme). NO tx/rx swap at bos! |
TMO HSD6 | TMO1.4.35-36 | Was in fee fodu 1.1.3 (old numbering scheme). tx/rx swap at bos. |
TMO HSD6 companion | TMO1.4.25-26 | Was in fee fodu 1.1.2 (old numbering scheme). tx/rx swap at bos. |
TMO HSD9 | TMO1.4.21-22 | Was in fee fodu 1.1.7 (old numbering scheme). tx/rx swap at bos. |
TMO HSD8 | TMO1.4.23-24 | Was in fee fodu 1.1.10 (old numbering scheme). tx/rx swap at bos. |
RIX HSD1 | RIX1.1.21-22 | Was in fee fodu 1.3.8 (old numbering scheme) |
RIX HSD0 | RIX1.1.17-18 | Was in fee fodu 1.3.9 (old numbering scheme) |
PEPPEX HSD1 | Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 21-22 (second from bottom). Also labelled "slot 4" on the slot itself. | Was in fee fodu 2.4.3 (old numbering scheme) |
PEPPEX HSD0 | Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 19-20 (third from bottom). Also labelled "slot 4" on the slot itself. | Was in fee fodu 2.4.4 (old numbering scheme) |
PEPPEX OPAL | Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 23-24 (bottom pair). Also labelled "slot 4" on the slot itself. | Was in fee fodu 2.4.5 (old numbering scheme) |
XTCAV | Room 208 Rack 2 PH2 fibers 61-62 from B005 (each cassette has 12 fibers, so top of sixth cassette from left) | Was in fee fodu 1.2.2 (old numbering scheme) |
TXI FIM | Room 208 XPM 5 AMC 1 SFP 2 To FODU 8 Cassete 2 Port 9-10 Data To FODU 8 Cassete 2 Port 11-12 |
XPM Topology
Code Block |
---|
lcls2Timing -> xpm0 -> 2 (tmo) -> 4 (tmo) -> 6 (208) -> BOS -> 3 (rix) -> 5 (208) -> BOS lcls1Timing -> xpm7 |
...