Page History
...
| drp-srcf-cmpNNN | KCU firmware | Comment | Application (Oct 17, 2022) | |
|---|---|---|---|---|
| 001 | DrpTDet | TMO low rate, XTCAV nic | slow tmo tdet (+xtcav) | |
| 002 | DrpTDet | RIX low rate, encoder nic | slow rix tdet (+mono) | |
| 003 | DrpTDet | TMO high rate | tmo high rate tdet | |
| 004 | XilinxKcu1500Pgp4_6Gbps_ddr | QSFP 1 cage is not working | rix/tmo wave8 Collection host | |
| 005 | DrpPgpIlv | rix hsd's | ||
| 006 | ClinkKcu1500Pgp2b | Omar: not ready for production | nothing | |
| 007 | ClinkKcu1500Pgp2b | tmo piranha | ||
| 008 | DrpTDet | didn't show up on xpm | rix user meb | |
| 009 | DrpPgpIlv | rix hsd's | ||
| 010 | DrpTDet | RIX high rate | rix fast tdet | |
| 011 | ClinkKcu1500Pgp2b | tmo fzp opal | ||
| 012 | ClinkKcu1500Pgp2b | |||
| 013 | No KCU | tmo and rix teb'sClinkKcu1500Pgp2b | ||
| 014 | Lcls2EpixHrXilinxKcu1500Pgp4_6Gbps | epix hr | ||
| 015 | No mlx5; Bad Ethernet | nothing | ||
| 016 | DrpTDet | No mlx5. Error messages | nothing | |
| 017 | DrpPgpIlv | tmo hsd_3 | ||
| 018 | DrpPgpIlv | tmo hsd_5,hsd_7 | ||
| 019 | DrpPgpIlv | nothing (commented out tmo hsd_4) | ||
| 020 | DrpPgpIlv | tmo hsd_2 | ||
| 021 | DrpPgpIlv | tmo hsd_6 | ||
| 022 | DrpPgpIlv | tmo hsd_8,hsd_9 | ||
| 023 | DrpPgpIlv | peppex hsd's | ||
| 024 | DrpPgpIlv | tmo hsd_10,hsd_11 | ||
| 025 | DrpTDet | rix slow tdet | ||
| 026 | ClinkKcu1500Pgp2b | tmo atm opal | ||
| 027 | ClinkKcu1500Pgp2b | rix atm opal | ||
| 028 | DrpTDet | XPM:6 | tmo ami | |
| 029 | DrpTDet | XPM:5 | rix ami | |
| 030 | DrpTDet | NC | tmo user meb | |
| 031 | XilinxKcu1500Pgp4_6Gbps_ddr | tmo user meb | ||
| 032 | DrpTDet | XPM:7 | LCLS1 HXR hutches | |
| mon001 | tmo meb and ami_manager neh-base.cnf, hsd.cnf, rix-hsd.cnf |
Cabling
Top Patch Panel:
NOTE: the rightmost MPO connections are MPO12 (2 rows, 4 columns). The left ones are MPO8. We should use MPO8 for KCU. The MPO12 are reserved for "future expansion" (can be converted to MPO8, I think).
| DON'USE FOR NOW | DON'T USE FOR NOW | (breakout cable) 1: cmp022(away from USB port) 2: cmp022(close to USB port) 3: cmp023 (away from USB port) 4: cmp023 (close to USB port) | (breakout cable) 1: cmp018(away from USB port) 2: cmp018(close to USB port) 3: cmp019 (away from USB port) 4: cmp019 (close to USB port) | (breakout cable) 1: cmp009(away from USB port) 2: cmp009(close to USB port) 3: cmp017 (away from USB port) 4: cmp017 (close to USB port) | (breakout cable) 1: cmp008 2: cmp010 3: cmp016 4: cmp025 | ||||||
(breakout cable) 1: cmp024(away from USB port) 2: cmp024(close to USB port) 3: - 4: - | (breakout cable) 1: cmp020(away from USB port) 2: cmp020(close to USB port) 3: cmp021 (away from USB port) 4: cmp021 (close to USB port) | (breakout cable) 1: cmp029 2: cmp030 3: -cmp032 4: - | (breakout cable) 1: cmp028 2: - 3: - 4: - | ||||||||
Bottom Patch Panel (MPO):
...
| Source | Destination | Notes |
|---|---|---|
| ATCA FEE router port 0 | ATCA room 208 router port 1 | 10Gb network to SRCF node, the connection is done via the octopus fiber #4 |
| room 208 ATCA crate switch optical fiber port 0 | SRCF LC cassette 4 (counting from 1, left to right) fibers 11/12 | 10Gb network to SRCF node (drp-srcf-cmp004?) |
| TMO XPM 2 network connection (TMO FODU 1, Cassette 4 fibers 5-6) | ATCA switch optical port 7 counting from 0 | needed to swap tx/rx fibers to get link-lock |
| RIX XPM 3 network connection (RIX FODU, cassette 1, fibers 15-16) | ATCA switch optical port 6 counting from 0 | |
| Mono Encoder Network | From FEE Fodu 1 cassette 3 fibers 1,2 to SRCF LC fodu fibers 21,22 | |
| Timing output of XPM2 in 208 | TMO FODU 1, Cassette 3, Fibers 17-18: 1.3.17-18 | Cassette 1 is missing |
| Timing output of XPM3 in 208 | RIX FODU 1, Cassette 1, Fibers 7-8: 1.1.7-8 | |
| XPM0-AMC0-PORT0 | RIX 1.1.3-4 | This is XPM0 → XPM3 in RIX, FODU 1 for RIX is FODU 5 in 208 |
| XPM0-AMC0-PORT1 | TMO 2.4.3-4 | This is XPM0 → XPM2 in TMO, FODU 2 for TMO is FODU 7 in 208 |
| XPM5-AMC0-PORT0 | RIX 1.1.3-4 | This is XPM3→ XPM5 |
| XPM6-AMC0-PORT0 | TMO 1.3.17-18 | This is XPM2→ XPM6 |
| XPM0-AMC1-PORT0 | FEE FODU 1, Cassette 4 fiber 11-12 (top right) | LCLS2 timing for FEE Teststand |
| TMO ATM CAMLINK | TMO FODU 1 cassette 3 fiber 1-2 (a.k.a. TMO1.3.1-2) | cassette 1 is missing, swapped tx/rx at bos |
| RIX FIM MR4K2 | RIX FODU 1 cassette 1 fibers 25-26 (a.k.a RIX1.1.25-26) | |
| RIX FIM MR3K2 | RIX1.1.27-28 | |
| RIX FIM CHEMRIX | RIX1.1.29-30 | |
| TMO FIM1 | TMO1.3.5-6 | Not sure which FIM this really corresponds to in TMO |
| TMO FIM2 | TMO1.3.7-8 | Not sure which FIM this really corresponds to in TMO |
| RIX HSD2 | RIX1.1.19-20 | I may be swapping hsd2/3 (this was FEE fodu 1.3.18, old numbering scheme) |
| RIX HSD3 | RIX1.1.23-24 | I may be swapping hsd2/3 (this was FEE fodu 1.3.15, old numbering scheme) |
| TMO CAMLINK OPAL1 | TMO1.4.1-2 | swapped tx/rx at bos |
| TMO CAMLINK OPAL2 | TMO1.3.3-4 | swapped tx/rx at bos |
| TMO CAMLINK FZP | TMO1.2.11-12 | swapped tx/rx at bos |
| RIX CAMLINK ATM | RIX1.3.13-14 | |
| TMO HSD3 or companion | TMO1.4.13-14 | I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.11 (old numbering scheme). Needed tx/rx swap at bos. |
| TMO HSD3 or companion | TMO1.4.15-16 | I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.9 (old numbering scheme). Needed tx/rx swap at bos. |
| TMO HSD5 or HSD7 | TMO1.4.31-32 | I may be swapping hsd5/hsd7. This one was in fee fodu 1.1.1 (old numbering scheme). Needed tx/rx swap at bos. |
| TMO HSD5 or HSD7 | TMO1.4.29-30 | I may be swapping hsd5/hsd7. This one was in fee fodu 1.1.5 (old numbering scheme). Needed tx/rx swap at bos. |
| TMO HSD4 | TMO1.4.27-28 | Was in fee fodu 1.1.4 (old numbering scheme). tx/rx swap at bos. |
| TMO HSD4 companion | TMO1.4.33-34 | Was in fee fodu 1.1.6 (old numbering scheme). tx/rx swap at bos. |
| TMO HSD1 | TMO1.4.17-18 | Was in fee fodu 1.1.12 (old numbering scheme). tx/rx swap at bos. |
| TMO HSD2 | TMO1.4.19-20 | Was in fee fodu 1.1.8 (old numbering scheme). NO tx/rx swap at bos! |
| TMO HSD6 | TMO1.4.35-36 | Was in fee fodu 1.1.3 (old numbering scheme). tx/rx swap at bos. |
| TMO HSD6 companion | TMO1.4.25-26 | Was in fee fodu 1.1.2 (old numbering scheme). tx/rx swap at bos. |
| TMO HSD9 | TMO1.4.21-22 | Was in fee fodu 1.1.7 (old numbering scheme). tx/rx swap at bos. |
| TMO HSD8 | TMO1.4.23-24 | Was in fee fodu 1.1.10 (old numbering scheme). tx/rx swap at bos. |
| RIX HSD1 | RIX1.1.21-22 | Was in fee fodu 1.3.8 (old numbering scheme) |
| RIX HSD0 | RIX1.1.17-18 | Was in fee fodu 1.3.9 (old numbering scheme) |
| PEPPEX HSD1 | Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 21-22 (second from bottom). Also labelled "slot 4" on the slot itself. | Was in fee fodu 2.4.3 (old numbering scheme) |
| PEPPEX HSD0 | Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 19-20 (third from bottom). Also labelled "slot 4" on the slot itself. | Was in fee fodu 2.4.4 (old numbering scheme) |
| PEPPEX OPAL | Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 23-24 (bottom pair). Also labelled "slot 4" on the slot itself. | Was in fee fodu 2.4.5 (old numbering scheme) |
| XTCAV | Room 208 Rack 2 PH2 fibers 61-62 from B005 (each cassette has 12 fibers, so top of sixth cassette from left) | Was in fee fodu 1.2.2 (old numbering scheme) |
XPM Topology
| Code Block |
|---|
globalTiminglcls2Timing -> newxpm0xpm0 -> 2 (tmo) -> 4 (tmo) -> 6 (208) -> BOS -> 3 (rix) -> 5 (208) -> BOS lcls1Timing -> xpm7 |
Problematic connections SRCF ↔ 208
...
Overview
Content Tools