The MEC attenuators are controlled by IOC ioc-xrt-mecppatt-ims running ioc/xrt/ims/R2.2.9. The host machine for this ioc is the RHEL5 Supermicro Atom ioc-xrt-mec-mot1 (B960 XRT R04 E39; subnet cds-lfe.pcsdn) which runs four other IOCs:
- ioc-xrt-mec-xfls-ims
- ioc-xrt-mecpims1-ims
- ioc-xrt-m3h-switch
- ioc-mec-pulsepicker-ims
serverStat does not report any additional hardware interfaces beyond ethernet.
Cann you also call out the digi/moza channels used and what else is located on that terminal server?Notes from Silke:
- The pulse picker may be complicated: the 3 PP devices in the XRT do share some physical setup.
- As all IOCs on that server are ethernet only, one can decide to move IOCs temporarily if needed (either move the attenuator or the pulse picker).
...
The database in ioc-xrt-m3gm3h-switch just contains links to other PVs found on the cds-lfe.pcdsn subnet:
- HXX:HXM:MMS01:*
- IOC: ioc-xrt-hxx-hxm-pim01-ims
- Host: ioc-xrt-rec01cds-lfe.pcsdn
- CXI:R48:EVR:41:*
- IOC: ioc-xrt-cxi-picker
- Hard RTEMS IOC
- HFX:DG2:STP:01:*
- IOC: ioc-xcsxcxxcs-stoppers
- Host: ioc-xrt-vacuum
- PATT:SYS0:1:*
- IOC: ioc-det-evg-fake, ioc-mec-evg-fake
...
These IOCs make use of a digi and a moxa. Switch swh-lfe-xrt is located at B960 XRT R02 E40 B.
There is the port usage information:
- digi-xrt-mec04
- switch location: swh-lfe-xrt:4/1/22, vlan=646 [cds-lfe-pcdsn]
- Ports 2101-2103: ioc-xrt-mec-xfls-ims
- Ports 2104-2114: ioc-xrt-mecppatt-ims
- digi-xrt-mec04:2104-2114
...
- digi-xrt-mec04: 2116
- moxa-xrt-dg3-01:4013
ioc-xrt-mec-xfls-imsis:
- digi-xrt-mec04: 2101-2103
- Port 2116: ioc-xrt-
...
- mecppatt-ims
...
...
- moxa-xrt-dg3-01
...
- digi-xrt-mec04: 2101-2103
ioc-xrt-m3h-switch:
- NONE
ioc-mec-pulsepicker-ims:
- moxa-xrt-dg3-01: 4014,4015
- digi-xrt-mec04: 2115
switchtool shows the moxa and the digi on the cds-lfe-pcdsn subnet.
...
- switch location: swh-lfe-xrt:2/1/11, vlan=646 [cds-lfe.pcdsn]
...
- Port 4013: ioc-xrt-
...
- mecpims1-ims
- Ports 4014,4015: ioc-mec-pulsepicker-ims