...
serverStat does not report any additional hardware interfaces beyond ethernet.
EditDelete
Silke Nelson added a comment - 26/Jan/23 10:42 AMCann you also call out the digi/moza channels used and what else iis located on that terminal server?
The pulse picker may be complicated: the 3 PP devices in the XRT do share some physical setup.
As all IOCs on that server are ethernet only, one can decide to move IOCs temporarily if needed (either move the attenuator or the pulse picker).
What does m3h-switch do?
...
Looking into channels.
In re: m3h_switch (dated from 9 July 2013; engineer jyin)
...
record(calcout, "XRT:M3H:SWITCH:SCAN") {
field(DESC, "Manage the Scan Rate")
field(INPA, "XRT:M3H:SWITCH.MOVE CPP" )
field(OUT, "XRT:M3H:SWITCH.SCAN")
field(CALC, "(A==0)?4:7")
field(OOPT, "On Change")
field(DOPT, "Use CALC" )
EditDeleteMcGehee, Peregrine added a comment - 26/Jan/23 11:53 AM
digi/moxa port information:
...
- moxa-xrt-dg3-01: 4014,4015
- digi-xrt-mec04: 2115
...
switchtool shows the moxa and the digi on the cds-lfe-pcdsn subnet.
...