...
Meetings
Expand |
---|
|
- - Status Meeting focus on mechanical integration. (Presentation with notes)
- - Detailed status meeting (System and electronics talk, Mechanics and cooling talk)
- - Status Meeting slides (file)
- - Status Meeting slides (file)
- - Status Meeting slides (file)
- - Status Meeting slides (file)
- - Status Meeting slides (file)
- - Status Meeting slides (file)
- - Concept design review (talk1, talk2 and talk3)
- - Meeting with the BL scientists (file)
- - Meeting with the BL scientists (file)
- - Meeting with the BL scientists (file)
- - Meeting with the BL scientists (file)
- - Internal Meeting focus on cooling simulation results (file)
- - Meeting with the BL scientists (file)
- - Mechanical status updated and board distribution (no presentation).
- - Tile cooling with simulations from Marco (ppt)
- - Mechanical status updated and board distribution (no presentation).
- - Mechanical status updated and board distribution (no presentation).
- - Status updates and follow up from 04/02 meeting (no file, only meeting notes)
- - Tile cooling and connector discussions (file)
- - Tile cooling and connector discussions (file)
- - Tile cooling and connector discussions (file)
- - Initial electromechanical design concept discussion with beam line group (file)
- - Initial electromechanical design concept discussion (file)
- - Initial electromechanical design concept discussion (file)
- - kick-off meetingFlex boards and wire thickness discussions (ppt)
- File with Dionisio's meeting notes (file)
|
Data communication protocol
...
Expand |
---|
|
Description | Priority | Assigned to | Design | Tested | Notes |
---|
- Analog board power supplies not powering up.
| High | Scott/Dionisio | Done |
| The missing connection on the power planes have been identified by Scott and implemented in the C01 design files. A new board spin is required. | | Medium | Dionisio/Tung |
|
| Need to change the fab notes to make board more flexible. If needed we will change the planes from solid to criss-cross pattern | - Carrier board copper plate opening is too narrow
| Medium | Marco | Done | Done | Marco has changed the design file to increase the opening and requested the tech to rework all existing copper carriers | - Component heights to not match pockets in the cooling block
| Medium | Marco |
|
| Scott found some components hight did not match the needs. Marco is working with Don to get this fixed | - Mounting holes on cooling block have wrong size
| High | Marco |
|
| Mounting hole on the cooling block are larger than in the board. This prevents us from securing the boards. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|