...
GLAST Component | Windows | Linux | Comments | |
ROOT Classes | ||||
calibRootData (v1r7p7) |
| Compiled just fine on Linux and Windows | ||
commonRootData (v2r15p3) |
| Compiled just fine on Linux and windows. Loaded and used the shared library in CINT. | ||
digiRootData (v9r17) |
| Compiled and ran test routine on Linux and Windows. Loaded and used the shared library in CINT. | ||
mcRootData (v2r21p1) |
| Compiled and ran test routine on Linux and Windows. Loaded and used the shared library in CINT. | ||
reconRootData (v9r14) |
| Compiled and ran test routine on Linux and Windows. Loaded and used the shared library in CINT. | ||
gcrSelectRootData (v2r1) |
| Compiled and ran test routine on Linux and Windows. | ||
General I/O | ||||
Can read in ntuples from DC2 |
|
| Tested interactively. Worked without problems on Linux | |
Can read in ntuples from DC1 |
| Tested interactively. Worked without problems on Linux. | ||
Can read in full ROOT tree files generated with 5.10.00 using 5.14.00? |
| Tested interactively. Worked on Linux (did receive too few bytes warning for AcdRecon) | ||
How is hadd? |
|
|
| |
ROOT I/O Packages | ||||
RootConvert (v1r25) |
| Compiled and ran test routine on Linux | ||
RootIo (v17r30p1) | | Compiled and ran test routine for writing on Linux and Windows which performs writing. Running test with reading produced some warning about reading too few bytes for vector<Double32_t> members in AcdRecon which are empty - part of the read job reads in rootTestData files created using v5.10.00. Fixed** was fine too. | ||
ntupleWriterSvc (v3r16p3) |
| Compiled and ran test routine on Linux and Windows just fine. | ||
CHECKOUT Packages | ||||
GlastRelease (v11r12) |
| |||
Analysis | ||||
PyRoot - does it work? |
| Big hairy deal to get it to work on Windows - it required modifying the ROOT.py file in ROOTSYS/bin. See: http://root.cern.ch/phpBB2/viewtopic.php?p=17618&sid=294348839e56fdaa7580b6e65253dc61 | ||
RootAnalysis () |
|
|
| |
Are there any problems with the standard analysis and plotting tools ? |
| Ran tutorials/demo.c in CINT on Windows - ran fine. Also compiled and ran $ROOTSYS/test, using Makefile.win32 and nmake. test/stress.exe failed the 8th test (trees split and compression modes) due to an assertion failure - sent message to ROOT forum. The failure was due to compiling in debug mode and all is fine, see RootTalk Forum: http://root.cern.ch/phpBB2/viewtopic.php?p=17519#17519. Ran guitest.exe and that seemed just fine. |
...