Looking at the dump table: LVOF
Selecting the proper screen
- Move the screen for LVOF: Experiment → LI20 → MC01 → M6 (LFOV)
Out position: 55mm
DRZ: 0mm
CsI: 145mm
(the screen can be moved by small amounts to change the exact position where the e-beam hits, e.g., to avoid beam marks of the screen, etc.) - You MUST move the DRZ or CsI screens OUT of the beam at the end of the shift, or as soon as you are done using them
LVOF: filter flipper
LI20 Experiment → LI20 → Beckhoff Digital I/O → Channel 21 LFOV filter flipper (out: see low-energy tail, main beam saturated; in: light attenuated, main beam is not saturated)
...