Page History
...
drp-srcf-cmpNNN | KCU firmware | Comment | Application (Oct 17, 2022) | |
---|---|---|---|---|
001 | DrpTDet | TMO low rate, XTCAV nic | slow tmo tdet (+xtcav) | |
002 | DrpTDet | RIX low rate, encoder nic | slow rix tdet (+mono) | |
003 | DrpTDet | TMO high rate | tmo high rate tdet | |
004 | XilinxKcu1500Pgp4_6Gbps_ddr | QSFP 1 cage is not working | rix/tmo wave8, neh-base.cnf | |
005 | DrpPgpIlv | rix hsd's | ||
006 | ClinkKcu1500Pgp2b | Omar: not ready for production | nothing | |
007 | ClinkKcu1500Pgp2b | rix mebuser, tmo piranha | ||
008 | DrpTDet | didn't show up on xpm | nothing | |
009 | DrpPgpIlv | rix hsd's | ||
010 | 010 | DrpTDet | RIX high rate | rix fast tdet |
011 | ClinkKcu1500Pgp2b | tmo fzp opal | ||
012 | ClinkKcu1500Pgp2b | tmo opal1 | ||
013 | No KCU | tmo teb | ||
014 | Lcls2EpixHrXilinxKcu1500Pgp4_6Gbps | rix teb | ||
015 | No mlx5; Bad Ethernet | nothing | ||
016 | DrpTDet | No mlx5. Error messages | nothing | |
017 | DrpPgpIlv | tmo hsd_3 | ||
018 | DrpPgpIlv | rix ami_manager, tmo hsd_5,hsd_7 | ||
019 | DrpPgpIlv | nothing (commented out tmo hsd_4) | ||
020 | DrpPgpIlv | tmo hsd_2 | ||
021 | DrpPgpIlv | tmo hsd_6 | ||
022 | DrpPgpIlv | tmo hsd_8,hsd_9 | ||
023 | DrpPgpIlv | nothing | ||
024 | DrpPgpIlv | tmo hsd_10,hsd_11 | ||
025 | DrpTDet | rix slow tdet | ||
026 | ClinkKcu1500Pgp2b | tmo atm opal | ||
027 | ClinkKcu1500Pgp2b | rix atm opal | ||
028 | DrpTDet | nothing | ||
029 | DrpTDet | nothing | ||
030 | DrpTDet | nothing |
Cabling
Top Patch Panel:
NOTE: the rightmost MPO connections are MPO12 (2 rows, 4 columns). The left ones are MPO8. We should use MPO8 for KCU. The MPO12 are reserved for "future expansion" (can be converted to MPO8, I think).
...
Overview
Content Tools