Page History
...
Executive summary: I think at 100kHz we can keep roughly the same number of nodes that we have in the FEE alcove.
Issues:
- which fibers should be MPO vs LC?
- should we fanout timing at SRCF or put it through the bos? (related question: should camlink devices go through the bos?)
- routing mono-encoder udp network over to srcf
- sharing xtcav between hutches with bos-switchable timing
100kHz data volumes:
- wave8: 8waveforms*256samples/sample*2bytes/sample*0.1MHz = 400MB/s
need to add FEX data too
- piranha: 2048px*2bytes/px*0.1MHz=410MB/s
- hsd full wf: 60000samples*2bytes/sample*0.1MHz = 12GB/s
max waveform length appears to be ~60000 samples looking at xtc2 file?
FEX needs to reduce it to 4GB/s (3x)
- bld: 336bytes/event*0.1MHz = 33MB/s
(from xtcreader -f /cds/data/psdm/prj/public01/xtc/tmoc00118-r0222-s008-c000.xtc2)
- timing: 309bytes/event*0.1MHz = 31MB/s
...
Overview
Content Tools