...
Changing the dipole settings
MC01 - Ch6 0 (DRZ in) 55 (everything out) 145 (CsI in) → before dipole scan move CsI out
e-beam should never be on CsI
- It is important that the e-beam never passes through the CsI array
- Move the screen for LVOF: Experiment → LI20 → MC01 → M6 (LFOV)
Out position: 55mm
DRZ: 0mm
CsI: 145mm
(the screen can be moved by small amounts to change the exact position where the e-beam hits, e.g., to avoid beam marks of the screen, etc.)
LFOV with DRZ in for low-energy electrons