Page History
...
The Graphical user interface of a DaqMux is shown in the figure Figure 2. The main graphical user interface for configuring the DaqMux is quite simple and masks a lot of the DaqMux configurations. It only allows the user to perform the following
- Choose the source of each of the 4 streams of each DaqMux
- Stimulate a software trigger in any of the two DaqMuxes (in case trigger mode is chosen)
- Open complete DaqMux settings
- View the AMC Up Converter and Down Converter card front panel image
| Anchor | ||||
|---|---|---|---|---|
|
The up converter front panel image is shown as follows
The up converter front panel image is shown in figure
The set of sources can are summarized here
Table 1: Possible combinations in the stream channel selection drop down combo box
| Source | Description |
|---|---|
| ${MuxIn#} : Test | |
| ${MuxIn#} : Disable | |
| ${MuxIn#} : ADC${ADC#} | |
| ${MuxIn#} : DAC${DAC#} | |
| ${MuxIn#} : DBG${DBG#} | |
| ${MuxIn#} : RF IN ${RF#} : ADC${ADC#} FP | |
| ${MuxIn#} : RF OUT MON : ADC${ADC#} FP | |
| ${MuxIn#} : DC IN ${DC#} : ADC${ADC#} FP | |
| ${MuxIn#} : TRIG MON : ADC${ADC#} (FP) | |
| ${MuxIn#} : ADC${ADCIN#} | |
| ${MuxIn#} : DAC${DACIN#} | |
| ${MuxIn#} : CLK PLL DAC : DAC${DAC#} | |
| ${MuxIn#} : LO PLL DAC : DAC${DAC#} | |
| ${MuxIn#} : DAC OUT : DAC${DAC#} (FP) | |
| ${MuxIn#} : RF OUT : DAC${DAC#} (FP) |
...
Crossing YAML/PVs/DaqMux original's requirements
...
Overview
Content Tools