Page History
...
SXR servers are in R06. There’s likely space in there.
https://docs.google.com/spreadsheets/d/1woH6NHS4IrOvr2zDVZD4R8x73moTXAps1PBqADUauC4/edit#gid=1690903792
Our, or at least my understanding was that we can use an trigger output from any nearby host with an EVR. To be specific:
- PLC: B940-009-R07
- EVR: B940-009-R06 (whatever host we have running the exit slit camera)
I assumed the point/beauty of the EVRs is to distribute these trigger sources so it doesn’t have to originate from any specific node. We were going to include a counter in the payload so we could address any off-by-one issues. I guess it’s more complicated!
Sorry, Chris, I didn’t realize this thread had taken up residence elsewhere otherwise I would have responded sooner. I try to keep an eye on the pcds-it list but it’s kind of a blindspot for me.
The question I have at this point is, where does the Ethernet/<whatever medium we end up choosing> have to go to deliver the UDP packet?
MHz Conversation with Georgi (Brief Update)
May 4, 2022
- whatever we have now stays
- perhaps add a second high-rate "MHz" relative date
- in november either we have to increase the current absolute encoder rate, or do the "interpolation". start beam starts at a few kHz.
- feels like a good chance we need interpolation mode since the MHz encoder does not yet exist