...

You can see optical powers on the kcu1500 with the pykcu command (and pvget).  See the timing-system section for an example of how to do this.  On the hsd's themselves it's not possible because the FPGA (on the hsd pcie carrier card) doesn't have access to the i2c bus (on the data card).

PvaDetector

• If you're seeing std::bad_alloc, see note above in 'datadev Driver' about configuring tdetsim.service
• use "-vvv" to get printout of timestamp matching process
• options to executable:  "-1" is fuzzy timestamping, "-0" is no timestamp matching, and no argument is precise timestamp matching.
• the IP where the PV is served might not be the same as the IP returned by a ping. For example: ping ctl-kfe-cam-02 returns 172.21.92.80, but the PV is served at 172.21.156.96
• netconfig can be used to determine the IP where the PV is served. For example:
  

  /reg/common/tools/bin/netconfig search ctl-kfe-cam-02-drp

  ctl-kfe-cam-02-drp:
  subnet: daq-drp-neh.pcdsn
  Ethernet Address: b4:2e:99:ab:14:4f
  IP: 172.21.156.96
  Contact: uid=velmir,ou=People,dc=reg,o=slac
  PC Number: 00000
  Location: Same as ctl-kfe-cam-02
  Description: DRP interface for ctl-kfe-cam-02
  Puppet Classes:

  Found 1 entries that match ctl-kfe-cam-02-drp.

...