...
Choices for plot types (plotname above) and required variables to be passed:
cavtemps
Usage:
srf_makeAutoPlot.py st cavtemps ACCL:LxB:yy cavn ; StripTool $STRIP_CONFIGFILE_DIR/srf_cavtemps.stp
...
STEPTEMP, CPLRTEMP1, CPLRTEMP2, DH:TEMP, UH:TEMP and if cavity 1 or 5 VT:TEMP and VB:TEMP
cryopipe
Usage:
srf_makeAutoPlot.py st cryopipe cm ; StripTool $STRIP_CONFIGFILE_DIR/srf_cryopipe.stp
...
Temps on cryolines: A, B1, B2, C, D, E, F, S, and both CD line temps
cplrtop
Usage:
srf_makeAutoPlot.py st cplrtop cm ; StripTool $STRIP_CONFIGFILE_DIR/srf_cplrtop.stp
...
All 8 CPLRTEMP1 signals for a given cryomodule
cplrbot
Usage:
srf_makeAutoPlot.py st cplrbot CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cplrbot.stp
...
All 8 CPLRTEMP2 signals for a given cryomodule
homus
Usage:
srf_makeAutoPlot.py st homus CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_homus.stp
...
srf_makeAutoPlot.py av homus CM ; lclsarch "srf_homus.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy= 01-35, H1, or H2
Signals added to config file:
All 8 UH:TEMP signals for a given cryomodule
homds
Usage:
srf_makeAutoPlot.py st homds CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_homds.stp
or
srf_makeAutoPlot.py av homds CM ; lclsarch "srf_homds.xml -plot"
Variables:
CM given as 01-35, H1, or H2
Signals added to config file:
All 8 DH:TEMP signals for a given cryomodule
steptmps
Usage:
srf_makeAutoPlot.py st steptmps CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_steptmps.stp
or
srf_makeAutoPlot.py av steptmps CM ; lclsarch "srf_steptmps.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
All 8 DH:TEMP STEPTEMP signals for a given cryomodule
cmcryos
steptmps
cmcryos
cmheves
cavhtrs
cmpiezov
cmvac
cmaact
cmpdes
cmpact
cmmag
...
Usage:
srf_makeAutoPlot.py st cmcryos CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmcryos.stp
or
srf_makeAutoPlot.py av cmcryos CM ; lclsarch "srf_cmcryos.xml -plot"
Variables:
CM given as 01-35, H1, or H2
Signals added to config file:
Upstream and downstream liquid levels and pressures, JT & CD valve positions, power on CD heater
cmheves
Usage:
srf_makeAutoPlot.py st cmheves CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmheves.stp
or
srf_makeAutoPlot.py av cmheves CM ; lclsarch "srf_cmheves.xml -plot"
Variables:
CM given as 01-35, H1, or H2
Signals added to config file:
The four Helium Vessel temps in a given cryomodule: cavity 1 top and bottom, and cavity 5 top and bottom.
cavhtrs
Usage:
srf_makeAutoPlot.py st cmhtrs CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmhtrs.stp
or
srf_makeAutoPlot.py av cmhtrs CM ; lclsarch "srf_cmhtrs.xml -plot"
Variables:
CM given as 01-35, H1, or H2
Signals added to config file:
All 8 cavity heater reading in one cryomodule (HV:POWER)
cmpiezov
Usage:
srf_makeAutoPlot.py st cmcryos CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmcryos.stp
or
srf_makeAutoPlot.py av cmcryos CM ; lclsarch "srf_cmcryos.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
All 8 piezo voltages in a given cryomodule (PZT:V)
cmvac - broken
Usage:
srf_makeAutoPlot.py st cmvac CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmvac.stp
or
srf_makeAutoPlot.py av cmvac CM ; lclsarch "srf_cmvac.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
Meant to be the three vacuums for a given cryomodule. Script for this doesn't work yet.
cmaact - broken
Usage:
srf_makeAutoPlot.py st cmaact CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmaact.stp
or
srf_makeAutoPlot.py av cmaact CM ; lclsarch "srf_cmaact.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
All 8 cavities' AACTMEANs for a given CM
Script currently has AACT instead of AACTMEAN
cmpdes
Usage:
srf_makeAutoPlot.py st cmpdes CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmpdes.stp
or
srf_makeAutoPlot.py av cmpdesCM ; lclsarch "srf_cmpdes.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
All 8 cavities' PDESs for a given CM
cmpact - broken
Usage:
srf_makeAutoPlot.py st cmpact CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmpact.stp
or
srf_makeAutoPlot.py av cmpact CM ; lclsarch "srf_cmpact.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
All 8 cavities' PACTMEANs for a given CM
Script currently has PACT instead of PACTMEAN
cmmag
Usage:
srf_makeAutoPlot.py st cmmag CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_cmmag.stp
or
srf_makeAutoPlot.py av cmmag CM ; lclsarch "srf_cmmag.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
Three BACTs (QUAD, XCOR, YCOR), three PSVOUT (power supply voltage), and the power in the heater on the magnet package.
magtemps
Usage:
srf_makeAutoPlot.py st magtemps CM ; StripTool $STRIP_CONFIGFILE_DIR/srf_magtemps.stp
or
srf_makeAutoPlot.py av magtemps CM ; lclsarch "srf_magtemps.xml -plot"
Variables:
CM given as ACCL:LxB:yy, yy=01-35, H1, or H2
Signals added to config file:
4 temps on the magnet, :MP:TEMP, and 4 temps on the current leads CL:TEMP