...

From Kaz: https://docs.google.com/document/d/1C33Hj1ABeDawbweOAVGJj2_PedpvLphzEQVGxMFA3HM/edit?usp=sharing

Miscellaneous Tips

• Because of it's low start_ns value, the epix100 must run in a separate readout group with a lower XPM L0Delay setting (currently 10)
• Since it is in a non-default readout group (currently 4 in TMO) remember to reset that value (in the Allocate window) when you remove it from the partition and then add it back later.  If you don't you will get an error from the epix100 on Configure.