Table of Contents

RIX

...

IOC

...

Commands

Run, for example, on rix-daq as user rixopr:

• mr3k2: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-rix-pgpw8-01/edm-ioc-rix-pgpw8-01.cmd
• mr4k2: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-rix-pgpw8-02/edm-ioc-rix-pgpw8-02.cmd
• chemrix: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-rix-pgpw8-03/edm-ioc-rix-pgpw8-03.cmd

TMO IOC Commands

Run on tmo-daq machine as user tmoopr:

• /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-tmo-pgpw8-01/edm-ioc-tmo-pgpw8-01.cmd
• /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-tmo-pgpw8-02/edm-ioc-tmo-pgpw8-02.cmd

Power Cycling

When a Wave8/FIM is power cycled some constants needed to be loaded into registers that control the ADCs.  My understanding from Bruce is that these values are currently the same for all boxes.  Eventually, Bruce will load these constants automatically when the corresponding IOC is restarted (which is also required after a power cycle).  Until that is ready, we provide this workaround.  The ssh to the appropriate machine can be done by anyone in the "ps-drp-users" permissions group.  The current fim-expert members of this group are: jjoshi, dakovski, nakahara, paheim.  Note that there is a "<lane>" parameter which must be set correctly in the "python" line below to select the appropriate box, and if there are more than one datadev boards you need to specify which one:

...

After this is done restart the IOC.

TMO

IOC Commands

Run on tmo-daq machine as user tmoopr:

...