Page History
...
Optional parameters on 2021-12-10
jungfrau_dark_proc -h
Code Block | ||||
---|---|---|---|---|
| ||||
Proceses jungfrau dark data Options: -h, --help show this help message and exit -d DSNAME, --dsname=DSNAME dataset name, default = None -s SOURCE, --source=SOURCE input ndarray source name, default = None -n EVENTS, --events=EVENTS maximal number of events total (in runs, steps), default = 100000 -m EVSKIP, --evskip=EVSKIP number of events to skip in the beginning of each step, default = 0 -e EVSTEP, --evstep=EVSTEP maximal number of events to process in each step, default = 2000 -b INT_LO, --int_lo=INT_LO intensity low limit, default = 1 -t INT_HI, --int_hi=INT_HI intensity high limit, default = 16000 -B RMS_LO, --rms_lo=RMS_LO rms low limit, default = 0.001 -T RMS_HI, --rms_hi=RMS_HI rms high limit, default = 16000 -F FRACLM, --fraclm=FRACLM allowed fraction limit, default = 0.1 -p PLOTIM, --plotim=PLOTIM control bit-word to plot images, default = 0 -D INTNLO, --intnlo=INTNLO number of sigma from mean for low limit on INTENSITY, default = 6.0 -U INTNHI, --intnhi=INTNHI number of sigma from mean for high limit on INTENSITY, default = 6.0 -L RMSNLO, --rmsnlo=RMSNLO number of sigma from mean for low limit on RMS, default = 6.0 -H RMSNHI, --rmsnhi=RMSNHI number of sigma from mean for high limit on RMS, default = 6.0 -c EVCODE, --evcode=EVCODE comma separated event codes for selection as OR combination, any negative code inverts selection, default = None -u, --upload upload files in calib directory, default = False -N STEPNUM, --stepnum=STEPNUM step/calibcycle number [0,2] or all by default, default = None -M STEPMAX, --stepmax=STEPMAX maximal number of steps or all by default, default = None -I SEGIND, --segind=SEGIND segment index to process, default = None --nrecs=NRECS number of records to collect data, default = 1000 --nrecs1=NRECS1 number of records for 1st stage processing, default = 50 --fraclo=FRACLO fraction of statistics [0,1] below low limit of the gate, default = 0.050000 --frachi=FRACHI fraction of statistics [0,1] below high limit of the gate, default = 0.950000 -o DIRREPO, --dirrepo=DIRREPO repository for calibration results, default = /reg/g/psdm/detector/gains/jungfrau/panels --logmode=LOGMODE logging mode, one of INFO, CRITICAL, WARN, WARNING, ERROR, DEBUG, NOTSET, default = INFO |
...
Code Block | ||||
---|---|---|---|---|
| ||||
Deployment jungfrau calibration parameters Options: -h, --help show this help message and exit -e EXP, --exp=EXP experiment name, default = None -d DET, --det=DET detector name, default = None -r RUN, --run=RUN run number for beginning of the validity range, default = None -t TSTAMP, --tstamp=TSTAMP non-default time stamp (<YYYYmmddHHMMSS) or run number(<10000) for constants selection in repo. By default run time is used, default = None -x DIRXTC, --dirxtc=DIRXTC non-default xtc directory which is used to access run start time, default = None -o DIRREPO, --dirrepo=DIRREPO non-default repository of calibration results, default = /reg/g/psdm/detector/gains/jungfrau/panels -c DIRCALIB, --dircalib=DIRCALIB deployment calib directory if different from standard one, default = None -I PANINDS, --paninds=PANINDS comma-separated (str) panel indexds to generate constants for subset of panels (ex. 2 panel of 8 in the detector), default = None -D, --deploy deploy constants to the calib dir, default = False -L LOGMODE, --logmode=LOGMODE logging mode, one of INFO, CRITICAL, WARN, WARNING, ERROR, DEBUG, NOTSET, default = INFO |
...
Overview
Content Tools