Search/Navigation:
Related:
SLAC
/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Page History
...
| FEB | FEB SN | Flange Board (HW) | Flange Channel | I At Boot (AnaN, AnaP, Digi) | I Mod ON | I Mod ON + Config | Ctrl Ch (dpm / ch) (1 is top cob) | Fiber (ctrl / Data) | jTag OK | Feb Address | Data Taking | Comment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L0-1t | 12 | 2 | 2 | 0.242 - 1.212 - 1.250 | 0.292 - 2.317 - 1.392 | 0.292 - 2.833 - 1.322 | 0 / 3 | C / G | Y | 0 | OK | Lost clock after few hrs up |
| L2-3t | 17 | 3 | 0 | 0.256 - 1.248 - 1.239 | 0.317 - 2.319 - 1.314 | 0.313 - 3.112 - 1.313 | 0 / 8 | D / H | Y | 2 | OK | |
| L5t | 05 | 0 | 0 | 0.236 - 1.216 - 1.287 | 0.272 - 2.101 - 1.334 | 0.271 - 2.715 - 1.334 | 1 / 5 | A / E | Y | 6 | OK | Lost clock after few hrs up. Also lost clock at the transition between download and prestart |
| L6t | 16 | 0 | 1 | 0.249 - 1.222 - 1.362 | 0.313 - 2.743 - 1.434 | 0.308 - 3.539 - 1.434 | 1 / 4 | A / E | Y | 8 | OK | Lost clock during download. |
| L4b ( In EPICS is L4t) | 08 | 2 | 1 | 0.248 - 1.241 - 1.248 | 0 / 4 | C / G | Y | 5 | OK | Only 2 HV pins on one hybrid (instead of 4) | ||
| L4t ( In EPICS is L4b) | 11 | 1 | 0 | 0.252 1.153 1.374 | 0.307 - 2.8755 - 1.448 | 0.304 - 3.564 - 1.449 | 1 / 8 | B / F | Y | 4 | OK | |
| L5b | 20 | 1 | 1 | 0.246 - 1.169 - 1.243 | 0.306 - 2.242 - 1.346 | 0.302 - 3.063 - 1.321 | 1 / 7 | B / F | Y | 7 | OK | |
| L6b | 04 | 1 | 2 | 0.248-1.199-1.278 | 0.307 - 2.705 -1.345 | 0.304 - 3.525 - 1.348 | 1 / 6 | B / F | Y | 9 | OK | |
| L0-1b | 07 | 2 | 0 | 0.241 - 1.284 - 1.313 | 0.293 - 2.235 - 1.394 | 0.293 - 2.931 - 1.394 | 0 / 5 | C / G | Y | 1 | OK | |
| L2-3b | 01 | 3 | 1 | 0.220 - 1.330 - 1.388 | 0.311 - 2.452 - 1.456 | 0.305 - 3.286 - 1.456 | 0 / 7 | D / H | Y | 3 | OK |
Current Issues with Back-end.
List of issues we observed during local data taking relative to the Back - End.
NOTICE!!! The dpm numbers in the daq map after 7 are off by one. Example: DataDpm[13] in the DAQ Map is hostname dpm14.
1) dpm[6] seems like it has broken data channels.
MTP1 => typeB fiber
0 1 2 3 4 5 6 7 8 9 10 11
L L N L N N L N L L L L
33 53 62 13 51 42 50 40 41
For the HALL-B:
1) Take breakout box labelled as "DATA"
2) Connect fiber type B in MTP1
3) Connect the octopus cable to fiber H
4) Connect the single fibers in the following order (from 0 to 11)
black, red, yellow, grey, teal, pink, white, purple, brown, green, orange, blue
5) In this configuration the mapping should be:
dpm pgp
3 3
5 3
X X
1 3
X X
X X
5 1
X X
4 2
5 0
4 0
4 1
2) daq-map sometimes shows "Not found" data links
Back End setup in the EEL
...
Overview
Content Tools