Page History

...

• ATCA shelf and COB connected to:  rdusr219
• Shelf name, IP: lbne1_0102,192.168.1.254
• RCE SDK path:  /afs/slac.stanford.edu/g/cci/volumes/vol1/sdimages/sdk/current (To get env: source /afs/slac.stanford.edu/g/cci/volumes/vol1/sdimages/sdk/V3.3.0/i86-linux-64/tools/envs-sdk.sh)
• RCE Soft/Firmware path:  /u1/hps/heavy-photon-daq
  • https://github.com/slaclab/heavy-photon-daq/releases/tag/release-4.1-run2016
• The HPS COB is in ATCA slot #2; slot #1 is used by other groups.
• DHPC server config: /u1/dhcp/dnsmasq.local.conf      (restart server with:  sudo service restart dnsmasq)

Start working/developing:

• Setup the general environment: 

  No Format
  source /u1/hps/setup_env.sh

• Start the conda environment:
  conda activate rougue-hps-ben

Setup of RCE bootloader for diskless booting: (based on this page)

...

        zynq-uboot> reset

In order to down/upload to github, set up a tunnel between rhel6-64 and rdusr219.  See Proto-DUNE: How to setup a temporary tunnel for github for a recipe.  

...

control DPM: eth1_test_dpm7

DTM: eth1_test_dtm1 

TO DO:

Upgrade sw to rogue, requires minor tweaks to fw (Ben)

...

Write EPICS sw (Cameron and Omar)