Page History
...
- Make sure all the detectors to be used are configured properly.
- Make sure the timing system is configured properly. As of this writing, RIX uses readout groups 2 and 5.
- When you're ready to record a scan, don't forget to enable recording before running bluesky_rix.py! In the control GUI, the disk icon is green when recordinghas a diagonal line over it when not recording.
- Use the "normal" DAQ interface to select the detectors of interest as "active" and assign their readout groups.
- Put the DAQ in ALLOCATED or CONNECTED state. Now, you are ready to run bluesky_rix.py.
...
Overview
Content Tools