Page History
...
- measurement order of points per quad should be kept done in style of Chris Kenney's style , as shown on photo.
- microscope origin location does not matter, but can be labeled somewhere for uniformity of metrology data.
- metrology data is saved in xlsx (in spreadsheets xlsx or text ) formatformat.
- units - signed micrometers, without decimal dot.
- example of data:
| Code Block | ||||
|---|---|---|---|---|
| ||||
quad 0 point X Y Z 1 0 0 0 2 403 39683 -147 3 37088 39308 -472 4 36680 -378 -326 5 322 40433 -141 6 366 80129 -302 7 37056 80079 -657 8 37007 40391 -452 9 42053 40578 -470 10 42046 80274 -669 11 78743 80269 -961 12 78733 40576 -725 13 42083 219 -297 14 42078 39472 -413 15 78774 39473 -711 16 78767 214 -640 quad 1 point X Y Z 1 81539 -4620 -731 2 81352 32062 -814 3 121034 32267 -1079 4 121225 -4420 -1015 5 81390 37579 -882 6 81497 74238 -993 7 121177 74148 -1219 8 121073 37468 -1127 9 122083 37596 -1104 10 122171 74281 -1329 11 161853 74189 -1620 12 161768 37499 -1433 13 122081 -4398 -916 14 122183 32283 -988 15 161877 32161 -1333 16 161765 -4520 -1286 Quad 2 ... Quad 3 ... |
...
- All labels on detector connectors and cables should show THE ONLY way WAY to connect camera in hatch.
Summary
- Engrave detector name on camera body.
- Add labels for unambiguous detector orientation:
- vector of gravity,
- x-y (and optional origin) for optical metrology,
- all labels should be left-to-right readable in hatch (now for now 2M.0 they are upside-down).
- Use the same detector orientation in optical metrology, Q0 is in upper left corner in microscope x-y. Origin does not matter.
- Use the same order of measuring points per quad, as numerated on photo.
- Connect camera connectors to properly labeled cables.
...
Overview
Content Tools