...
Reason
...
for
...
change
...
At
...
C&A's
...
request:
...
We
...
have
...
a
...
new
...
GR,
...
GR
...
v15r40,
...
which
...
contains
...
the
...
space
...
craft
...
alignment
...
code.
...
We
...
also
...
have
...
two
...
new
...
sets
...
of
...
job
...
options:
...
one
...
set
...
to
...
enable
...
the
...
space
...
craft
...
alignment.
...
The
...
other
...
is
...
to
...
turn
...
on
...
the
...
TKR
...
alignment
...
again
...
(which
...
was
...
accidentally
...
turned
...
off
...
on
...
July
...
16).
There are also general updates to the monitoring.
Test Procedure
We have processed data runs in the DEV pipeline with this version of L1Proc.
Rollback procedure
We can switch back to the previous version of L1Proc in case of problems.
CCB Jira
Details
L1Pipeline v1r64
GlastRelease v15r40:
- The main change with this GR is the space craft alignment code. In addition, we have added two sets of job options: one to enable the space craft alignment and another to enable the TKR alignment that was accidentally turned off on July 16. These four lines of JO will be added to Gleam in a subsequent GR. For the moment they are appended to the usual JO by the L1 pipeline. (Sorry for the funky format, but Confluence insists on interpreting the third JO line as a macro)
| No Format |
|---|
There are also general updates to the monitoring. h2. Test Procedure We have processed data runs in the DEV pipeline with this version of L1Proc. h2. Rollback procedure We can switch back to the previous version of L1Proc in case of problems. h2. CCB Jira [SSC-130@JIRA] h2. Details *L1Pipeline v1r64* *GlastRelease v15r40:* \- The main change with this GR is the space craft alignment code. In addition, we have added two sets of job options: one to enable the space craft alignment and another to enable the TKR alignment that was accidentally turned off on July 16. These four lines of JO will be added to Gleam in a subsequent GR. For the moment they are appended to the usual JO by the L1 pipeline. - FT1Alg.CorrectForAberration = true; - FT1Alg.AlignmentFlavor = "vanilla"; - Calibration.Members = {"TkrCalibAlg/TkrReconCalib"}; - TkrReconCalib.calibFlavor = "vanilla"; \ |
-
...
...
for
...
...
...
with
...
respect
...
to
...
the
...
previous
...
production
...
release,
...
GR
...
v15r39.
...
There
...
are
...
no
...
changes
...
in
...
the
...
system
...
tests.
...
-
...
...
...
with
...
respect
...
to
...
GR
...
v15r39.
...
dataMonitoring/FastMonCfg:
...
v1r5p0
...
-
...
Add
...
spacecraft_orbit_mode
...
and
...
spacecraft_orbit_inSAA.
...
Relevant
...
jira(s):
...
...
- Remove cut at 0 for Cal plots CalX_Total_NHit_TH1
...
and
...
CalX_NHit_TH1
...
in
...
config.xml.
...
Relevant
...
jira(s):
...
...
- Remove Tick20MHzDeviation_SuperZoom_TH1
...
and
...
tune
...
Tick20MHzDeviation_Zoom_TH1
...
x-axis
...
to
...
(-300,
...
-100)
...
in
...
config.xml
...
configLCI.xml
...
MergeHistos_FastMon.txt.
...
Relevant
...
jira(s):
...
...
- Change histogram name AcdHitsCounter_CableChannel_TH2
...
to
...
AcdHitMap_GafeGarc_TH2,
...
and
...
swap
...
axis
...
to
...
match
...
the
...
Digi
...
definition
...
in
...
config.xml
...
configLCI.xml
...
MergeHistos_FastMon.txt.
...
Relevant
...
jira(s):
...
...
| Wiki Markup |
|---|
*dataMonitoring/DigiReconCalMeritCfg: v1r2p25*
\- Add FastMon trending quantities FastMon_spacecraft_orbit_mode and FastMon_spacecraft_orbit_inSAA as ValueChange. in monconfig_fastmon_trending.xml
\- Changes to address [GDQMQ-195|https://jira.slac.stanford.edu/browse/GDQMQ-195]
\- Check that signal > 0 in ACD PMT that vetoed before computing Log10() to fill histogram. This only affects recon histos job (monconfig_recon_histos.xml).
\- Remove cut at 0 for Cal plots CalX_Total_NHit_TH1 and CalX_NHit_TH1_Tower\[16\]. Changes to address [GDQMQ-230|https://jira.slac.stanford.edu/browse/GDQMQ-230]
\- Remove Tick20MHzDeviation_SuperZoom_TH1 from merge histo digi list. Changes to address [GDQMQ-246|https://jira.slac.stanford.edu/browse/GDQMQ-246]
\- Remove Tick20MHzDeviation_SuperZoom_TH1 and tune Tick20MHzDeviation_Zoom_TH1 x-axis to (-300, \-100). Changes to address [GDQMQ-246|https://jira.slac.stanford.edu/browse/GDQMQ-246]
\- Add histogram to hold pedestals from the database. |
...
dataMonitoring/Common:
...
v4r9p0
...
-
...
Add
...
function
...
LookupErrorCode
...
to
...
Lookup
...
the
...
symbolic
...
name
...
of
...
an
...
error
...
code
...
in
...
FastMon.
...
Relevant
...
jira(s):
...
...
- New variable in pGloblals to tell FastMon to dump event with an error to file : FASTMON_DUMP_ERRORS_TO_FILE
...
is
...
set
...
to
...
false,
...
and
...
is
...
used
...
only
...
for
...
debugging.
...
Relevant
...
jira(s):
...
...
- New attribute "seconds_elapsed"
...
in
...
the
...
FastMon
...
parsed
...
by
...
the
...
pErrorLogger
...
module.
...
-
...
New
...
algorithm
...
to
...
normalize
...
the
...
number
...
of
...
errors
...
to
...
the
...
run
...
duration
...
added
...
to
...
pErrorLogger.
...
-
...
Minor
...
bug
...
fix:
...
the
...
algorithm
...
alg__values
...
was
...
crashing
...
if
...
for
...
some
...
reason
...
it
...
was
...
not
...
run
...
(for
...
instance
...
if
...
the
...
plot
...
was
...
missing).
...
Which
...
should
...
never
...
happen,
...
but...
...
good
...
to
...
be
...
prepared.
...
-
...
Another
...
bug
...
fix:
...
exception
...
handling
...
correctly
...
implemented
...
in
...
alg__empty_bins.
...
-
...
Added
...
a
...
new
...
class
...
(pErrorLogger)
...
to
...
apply
...
alarms
...
on
...
the
...
xml
...
output
...
files
...
from
...
the
...
fastMon
...
error
...
handler
...
and
...
the
...
verify
...
module.
...
The
...
interface
...
is
...
identical
...
to
...
the
...
one
...
of
...
the
...
alarm
...
handler,
...
with
...
the
...
only
...
difference that the new class operates on xml files, rather than root files (and the algorithms are obviously different). Not running into the pipeline, yet.
- Implemented the pedestal deviation in the CAL fitting tool, based on the new file from David (with the histogram of the pedestal references).
- Number of degrees of freedom and reduced chisuare added to the details dict for all the algorithms involving fitting.
- Left fitting range changed from 1.5 to 2.5 sigma for LEX8 and HEX8 CAL pedestals in pCalPedsAnalyzer.py.
- Some minor refactoring in the p*Analyzer classes to allow the derived classes to add their own histograms to the ones specified in the base class.
- Added histograms of the mean and rms values wrt the truncated average method in pCalPedsAnalyzer and pAcdPedsAnalyzer.
- Added placeholders for the pedestal deviations in pCalPedsAnalyzer and pAcdPedsAnalyzer.
- New alarm algorithm added: alg__low_high_ratio,
...
measuring
...
the
...
ratio
...
--in
...
terms
...
of
...
number
...
of
...
entries-
...
-
...
below
...
and
...
above
...
a
...
given
...
pivot
...
point.
...
Relevant
...
jira(s):
...
GDQMQ-26
...
-
...
All
...
the
...
alarms
...
parameters
...
with
...
a
...
default
...
value
...
(i.e.
...
those
...
which
...
may
...
not
...
be
...
specified
...
in
...
the
...
xml
...
file)
...
added
...
to
...
the
...
parameters
...
dict
...
of
...
the
...
algorithm
...
so
...
that
...
they
...
make
...
it
...
to
...
the
...
output
...
xml
...
file.
...
-
...
Methods
...
to
...
adjust
...
the
...
x
...
range
...
in
...
pAlarmBaseAlgorithm
...
modified
...
to
...
use
...
the
...
getParameter()
...
method
...
for
...
consistency
...
(this
...
way
...
the
...
min
...
and
...
max
...
parameters
...
make
...
it
...
to
...
the
...
output
...
xml
...
file).
...
-
...
All
...
algorithms
...
modified
...
to
...
accept
...
both
...
TH1F
...
and
...
TH1D
...
(and/or
...
TH2F
...
and
...
TH2D
...
where
...
necessary).
...
-
...
Test
...
functions
...
for
...
all
...
the
...
algorithms
...
modified
...
as
...
to
...
...
out
...
the
...
actual
...
parameters
...
dict,
...
as
...
it
...
is
...
shipped
...
out
...
to
...
the
...
xml
...
file.
...
*
...
Relevant
...
jira(s):
...
...
- Output status promoted to warning (used to be undefined) in the edge finders if the edege(s)
...
is
...
(are)
...
not
...
found.
...
The
...
idea
...
is
...
that
...
a
...
minimu
...
suitable
...
number
...
of
...
entries
...
is
...
required
...
before
...
running
...
an
...
alarm
...
on
...
a
...
plot;
...
if
...
the
...
condition
...
is
...
not
...
met
...
the
...
status
...
is
...
UNDEFINED---no
...
need
...
to
...
bother.
...
This
...
change
...
is
...
intended
...
to
...
distinguish
...
the
...
cases
...
in
...
which
...
the
...
algorithm
...
is
...
supposed
...
to
...
have
...
enough
...
stastistics
...
(and
...
hence
...
to
...
find
...
the
...
edge)
...
but
...
it
...
doesn't.
...
-
...
Bug
...
fix
...
in
...
pBaseAnalyzer:
...
undefined
...
variable
...
when
...
printing
...
the
...
fit
...
parameters
...
on
...
the
...
screen,
...
was
...
affecting
...
the
...
debug
...
mode
...
only.
...
-
...
Bug
...
fix
...
in
...
pBaseAnalyzer:
...
the
...
errors
...
bars
...
were
...
not
...
set
...
correctly,
...
there
...
was
...
an
...
offset
...
of
...
-1.
...
-
...
Default
...
values
...
for
...
the
...
ACDanalyzer
...
quantites
...
(for
...
the
...
unphysical
...
empty
...
histograms)
...
set
...
to
...
0.0
...
rather
...
than
...
-1.0
...
dataMonitoring/FastMon:
...
v4r4p1
...
-
...
Update
...
error
...
handling
...
using
...
a
...
new
...
function
...
provided
...
by
...
Ric
...
to
...
automatically
...
log
...
the
...
error
...
type
...
for
...
ALL
...
iterators.
...
-
...
TEM_BUG
...
are
...
still
...
tagged
...
as
...
such
...
in
...
the
...
ERR
...
contribution
...
but
...
in
...
the
...
TKR
...
contribution iterator UnphysStrip,
...
BadStripOrder,
...
UnPhysTOT
...
and
...
TooManyHits
...
are
...
not
...
anymore
...
counted
...
as
...
TEM_BUG,
...
the
...
bug
...
should
...
be
...
catched
...
earlier.
...
-
...
The
...
function
...
LookupErrorCode(obj,
...
code)
...
is
...
defined
...
in
...
Common/python/pGlobals.py
...
v4r9p0.
...
This
...
means
...
that
...
this
...
version
...
of
...
FastMon
...
(>v4r4p0)
...
REQUIRES Common >=
...
v4r9p0.
...
Relevant
...
jira(s):
...
...
- error_summary
...
is
...
filled
...
in
...
__postEvent
...
:
...
pDataProcessor.
...
Relevant
...
jira(s):
...
...
- When FASTMON_DUMP_ERRORS_TO_FILE
...
is
...
set
...
to
...
true,
...
the
...
events
...
with
...
an
...
error
...
are
...
dumped
...
to
...
a
...
file
...
calling
...
the
...
new
...
method
...
__dumpEventToFile.
...
For
...
debugging
...
purpose
...
only
...
:
...
pDataProcessor.
...
Relevant
...
jira(s):
...
...
- Add spacecraft_orbit_mode
...
and
...
spacecraft_orbit_inSAA,
...
read
...
them
...
from
...
magic7,
...
pass
...
them
...
to
...
the
...
updated
...
pSCPosition
...
constructor,
...
add
...
get
...
methods,
...
and
...
fill
...
quantities
...
in
...
the
...
pGeomagProcessor
...
in
...
pM7Parser.py
...
pSCPosition.py
...
pGeomagProcessor.py.
...
Relevant
...
jira(s):
...
...
- Add the seconds_elapsed
...
to
...
the
...
error
...
summary:
...
pXmlErrorMerger.
...
Relevant
...
jira(s):
...
...
- Add the seconds_elapsed
...
to
...
the
...
error
...
summary:
...
pErrorHandler.py
...
-
...
Give
...
number
...
of
...
seconds
...
elapsed
...
to
...
the
...
ErrorHandler:
...
pDataProcessor.py
...
-
...
Add
...
ERR_TrgParityError
...
to
...
the
...
handleError(),
...
to
...
synced
...
with
...
the
...
last
...
LDF
...
developments,
...
pLATcomponentIterator.py
...
-
...
Bug
...
fix
...
in
...
gtrcPhaseError,
...
pERRcontributionIteratorBase.py.
...
Relevant
...
jira(s):
...
...
- Update old files to v3r5p6 after the tags were lost. Hopefully, everything is OK now. I hate cvs even more than before.
- Bug fix, event number was not correctly reported in pErrorHandler. Relevant jira(s):
...
...
- Change histogram name AcdHitsCounter_CableChannel_TH2
...
to
...
AcdHitMap_GafeGarc_TH2,
...
and
...
swap
...
axis
...
to
...
match
...
the
...
Digi
...
definition,
...
in
...
pCustomPlotter
...
-
...
Log
...
the
...
LDF
...
version
...
in
...
pDataProcessor.
...
Relevant
...
jira(s)
...
:
...
...
and
...
...
svac/Monitor:
...
v1r2p25
...
-
...
Add
...
FastMon
...
trending
...
quantities
...
FastMon_spacecraft_orbit_mode
...
and
...
FastMon_spacecraft_orbit_inSAA
...
as
...
ValueChange.
...
in
...
monconfig_fastmon_trending.xml
...
-
...
Needs
...
DigiReconCalMeritCfg
...
v1r2p23
...
-
...
Changes
...
to
...
address
...
...
- Bug corrected in definition of ValChange. This bug prevented using proxies with ValChange values.
Complete set of tags for L1Proc 1.64
Code Versions
GlastRelease (sim/recon)
...
v15r40
...
*
ScienceTools (Level
...
2)
...
:
...
v9r6p2
Science Ops (task
...
defs,
...
scripts):
...
Level 1 pipeline code and applications running in L1:
svac/L1Pipeline:
...
v1r64
...
*
...
calibTkrUtil
...
v2r6p2
...
calibGenTKR
...
v4r5
...
dataMonitoring/AlarmsCfg:
...
v4r7p0
...
dataMonitoring/FastMonCfg:
...
v1r5p0
...
*
...
dataMonitoring/DigiReconCalMeritCfg:
...
v1r2p25
...
*
...
dataMonitoring/Common:
...
v4r9p0
...
*
...
dataMonitoring/FastMon:
...
v4r4p1
...
*
...
datMonitoring/IGRF:
...
v1r0p1
...
svac/Monitor:
...
v1r2p25
...
*
...
svac/EngineeringModelRoot:
...
v4r3
...
svac/TestReport:
...
v6r16
...
users/richard/pipelineDatasets:
...
v0r6
...
ft2Util:
...
v1r2p23
...
evtClassDefs
...
v0r6
...
GPLtools:
...
v1r11
...