Introduction
...
The BPM IOC and the Bunch Length firmware are triggered by the timing system. The firmware reads and digitizes the sensors upon receiving the trigger. Once the software receives TMIT from the BPM through the FCOM network, it resends the info to the firmware that uses it to calculate IMAX and SUM. The firmware sends the results to the software, that directs the info to two different places: the Fast Feedback receives it through the FCOM network and the BSA has its records filled with them.
...
Gliffy Diagram |
---|
| |
---|
name | BlenFcom processBlob() |
---|
|
Control filters and check status of them