Page History
...
- must be done after either the offsets or pedestals have changed
- can be used when creating a new experiment.
- it requires an existing expt/run-number so it can see the panel-id's and copy the appropriate constants into the experiment calib-dir
Example geometry files:
Code Block |
---|
/reg/g/psdm/detector/alignment/epix10ka/calib/Epix10ka::CalibV1/MfxEndstation.0:Epix100a.0/geometry/0-end.data (COMING SOON single sensor)
/reg/g/psdm/detector/alignment/epix10kaquad/calib/Epix10kaQuad::CalibV1/NoDetector.0:Epix10kaQuad.0/geometry/0-end.data (quad made of 4 sensors)
/reg/g/psdm/detector/alignment/epix10ka2m/calib/Epix10ka2M::CalibV1/NoDetector.0:Epix10ka2M.0/geometry/0-end.data (COMING SOON 4-quad detector) |
Jungfrau
The detector group must provide all gain/offset data for jungfrau.
...
Overview
Content Tools