...
10:30 Replaced 0x0A58(labelled A57 in the configs) with SLAC RD53A device 0x0A97.
11: 12 Beam was up and started taking runs, but no events were being built, called Timon and he said module A54 does not like to be power cycled. So we requested access to go down and fix it.
...
13:40 Timon finished remotely tuning the SLAC module A97 but when a run was started there were no hits seen by the module and there were some infrequent readout errors (received data not valid). Timon is attempting to fix the problem but for now only the LBL module A54 is being run.
Run_544 (13 deg) | |||
---|---|---|---|
Run_565 (62 deg) |
Run | Start | End time | #events | RD53a DUT | Particle rate | Comments |
---|---|---|---|---|---|---|
541 | 11:48 | 12:22 | 10k | C | 280hit/plane | HV: 60 Lost beam for a couple minutes at beginning of run. |
542 | 12:23 | 12:56 | 10k | C | 340hit/plane | HV: 60 |
544 | 13:01 | 13:34 | 10k | C | HV changed back to 100V for this and rest of runs | |
546 | 13:40 | 13:45 | 1.5k | C, D | Timon tuned SLAC module(D) but when the run was started no hits were seen and some sparse readout errors showed up. | |
552 | 14:11 | 14:44 | 9.9k | C | ||
556 | 15:45 | 16:19 | 9.9k | C | 575hit/plane | Changed angle to 60 degrees. SLAC module not connected; can't mount due to short screws. Forgot to reset histograms before start; rest around 800-900 events. |
558 | 16:32 | 17:05 | 9.9k | C | 20hits/plane | Asked for smaller number of particles; aiming for MIMOSA->30 particles and RD53A->20. |
559 | 17:06 | 17:42 | 10k | C | ||
562 | 17:50 | 18:03 | 2k | C | Added cosmic telescope to eudaq. Stopped because RCE producer died. | |
564 | 18:05 | 18:39 | 10k | C | ||
565 | 18:39 | 19:13 | 10k | C | ||
566 | 19:13 | 19:47 | 9.9k | C | ||
568 | 19:57 | 20:30 | 10K | C | Asked for lower rate (5 particles/bcc) for tracking reconstructions. 2hits/plane for RD53A. 7hits/plane for MIMOSA. | |
569 | 20:30 | 21:04 | 10K | C | ||
570 | 21:04 | C | Last run of the night. | |||