Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

19:09 Stopped runs to try and get synchronous front end working.

19:59 Attempts to fix the synchronous front end failed, after returning settings to how it was before trying to fix the front end the chip won't turn on. After many attempts to remotely power cycle and fix the problem, an access was requested to go down and fix it manually.

 

 

 

 

 

 

RunStartEnd time#eventsRD53a DUTParticle rateComments
48111:5211:561kC, D RD 53A tilted at 11.8 degrees. Run ended early to change YARR config.
48211:5612:357kC, D4.8 / 0.8The trigger from the machine stopped. Run ended.
49714:5515:3110kC, D  
49815:3116:0510kC, D  
49916:0516:3910kC, D  
50116:4217:1510kC, D  
50217:1517:344kC, D  
50517:4417:512kC, D Rate was increased from 6 e- to 600e- per pulse.
50617:5618:032kC,D Picoscope data file: 55765
50718:0418:122kC,D Picoscope data file: 56275
50818:1218:192kC,D Picoscope data file: 56748
50918:3018:372kC,D Picoscope data file: 57782
51018:3918:462kC,D Picoscope data file: 58361
51118:4718:542kC,D Picoscope data file: 58824
51218:5519:022kC,D Picoscope data file: 59300
51319:0219:092kC,D Picoscope data file: 59750
 522  20:3320:402k C,D Picoscope data file: 
       
350&270(hits/plane)Set HV to 60
52320:4220:492kC,D350&270(hits/plane)

Set HV to 40

52420:5120:582kC,D350&270(hits/plane)

Set HV to 30

52621:0121:082kC,D340&280(hits/plane)Set HV to 20
52721:1121:182kC,D340&280(hits/plane)Set HV to 14
52821:1921:262kC,D340&280(hits/plane)Set HV to 10
52921:2821:352kC,D340&290(hits/plane)Set HV to 6
53021:3621:432kC,D340&310(hits/plane)Set HV to 2
53121:5021:572kC,D350&270(hits/plane)Set HV to 50
532  2kC,D(hits/plane)Set HV to 35      
    2k  C,D(hits/plane)Set HV to 25 
    2k  C,D(hits/plane)Set HV to 18 
    2k  C,D(hits/plane)Set HV to 16 
    2k  C,D(hits/plane)Set HV to 12 
    2k  C,D(hits/plane)Set HV to 8 
    2k   C,D(hits/plane)Set HV to 4 
Cosmic RunStartEnd time#eventsTrigger DelayComments
051~9:50~9:511k-104500, 224Testing without the beam for random noises. No significant noise seen.
05311:56 12:2710k-104500, 224 
05412:34 13:059k-Cosmic run ended in order to change the trigger over to the RD 53A's
05714:5815:00~600-Short run to make sure trigger/timing is still working as expected (Runs 55 and 56 before this were empty due to beam being off for access to fix triggers)
05815:0515:4010K- 
05915:4716:2210K- 
06016:2316:5710K- 
06116:5816:3410K- 
062   -