...
17:44 Started Run 505 and will try to run Picoscope during this run. Also since the rate is increased, the runs will only be taken until 2K.
17:51 Stopped Run 505 with 2K hits. Picoscope worked well and will continue to use it. Beam went down momentarily and came back up in a couple of minutes.
17:56 Beam came up and started Picoscope readout before starting data taking for Run 506. Will continue to stop runs at 2K events, Procedure for using picoscope after a run: kill the picoscope program, take down the last 5 digits of the picoscope data file corresponding to the run (ll ~/slactb_scope and take the most recent files last 5 digits) and then start the picoscope program again(build/bin/slactb_scope) and start a new run in RC panel.
19:09 Stopped runs to try and get synchronous front end working.
| Run | Start | End time | #events | RD53a DUT | Particle rate | Comments |
|---|---|---|---|---|---|---|
| 481 | 11:52 | 11:56 | 1k | C, D | RD 53A tilted at 11.8 degrees. Run ended early to change YARR config. | |
| 482 | 11:56 | 12:35 | 7k | C, D | 4.8 / 0.8 | The trigger from the machine stopped. Run ended. |
| 497 | 14:55 | 15:31 | 10k | C, D | ||
| 498 | 15:31 | 16:05 |
| 10k | C, D | |||||||||||
| 499 | 16:05 | 16:39 | 10k | C, D | ||||||||
| 501 | 16:42 | 17:15 | 10k | C, D | ||||||||
| 502 | 17:15 | 17:34 | 4k | |||||||||
| Run | Start | End time | #events | RD53a DUT | Particle rate | Comments | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 481 | 11:52 | 11:56 | 1kC, D | RD 53A tilted at 11.8 degrees. Run ended early to change YARR config. | 482 | 11:56 | 12:35 | |||||
| 505 | 17:44 | 17:51 | 2k | 7kC, D | 4.8 / 0.8 | The trigger from the machine stopped. Run ended. | ||||||
| Rate was increased from 6 e- to 600e- per pulse. | ||||||||||||
| 506 | 17:56 | 18:03 | 2k | C,D | Picoscope data file: 55765 | |||||||
| 507 | 18:04 | 18:12 | 2k | C,D | Picoscope data file: 56275 | |||||||
| 508 | 18:12 | 18:19 | 2k | C,D | Picoscope data file: 56748 | |||||||
| 509 | 18:30 | 18:37 | 2k | C,D | Picoscope data file: 57782 | |||||||
| 510 | 18:39 | 18:46 | 2k | C,D | Picoscope data file: 58361 | |||||||
| 511 | 18:47 | 18:54 | 2k | C,D | Picoscope data file: 58824 | |||||||
| 512 | 18:55 | 19:02 | 2k | C,D | Picoscope data file: 59300 | |||||||
| 513 | 19:02 | 19:09 | 2k | C,D | Picoscope data file: 59750 | |||||||
| C,D | Picoscope data file: | |||||||||||
| Cosmic Run | Start | End time | #events | Trigger Delay | Comments |
|---|---|---|---|---|---|
| 051 | ~9:50 | ~9:51 | 1k | -104500, 224 | Testing without the beam for random noises. No significant noise seen. |
| 053 | 11:56 | 12:27 | 10k | -104500, 224 | |
| 054 | 12:34 | 13:05 | 9k | - | Cosmic run ended in order to change the trigger over to the RD 53A's |
| 057 | 14:58 | 15:00 | ~600 | - | Short run to make sure trigger/timing is still working as expected (Runs 55 and 56 before this were empty due to beam being off for access to fix triggers) |
| 058 | 15:05 | 15:40 | 10K | - | |
| 059 | 15:47 | 16:22 | 10K | - | |
| 060 | 16:23 | 16:57 | 10K | - | |
| 061 | 16:58 | 16:34 | 10K | - | |
| 062 | - | Rate was increased | |||