Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Day/weekDateActivitiesPrograms
ThursdayNov/1Dismantling previous experiment. ESA setup preparation starts 10am. 
FridayNov/2Day: preparation  /  Night: first beam ~9pm 
SaturdayNov/3Day: beam run  / Night:  MD, no beam to ESTBInitial test runs
SundayNov/4Day: ESTB beam / Night: no ESTB beamComplete setup / first runs
MondayNov/5Day: ESTB beam / Night: no ESTB beam2x LBNL devices at 0 degrees
TuesdayNov/6Day: ESTB beam  / Night: no ESTB beam2 extra hours of beam  (9AM-11PM)2x LBNL devices at inclined
WednesdayNov/7Day: Late start ESTB beam at 11AM / Night: no ESTB beam until ~11pm end of period(11AM-9PM)2x SLAC devices

Main goals:

...

  • Continued accumulating statistics with the current 2 LBNL RD53a modules at 0 degrees
  • Investigate cosmicGui setup and routing beam trigger to HSIO2 for independent Cosmic telescope runs  
  • Continue developing the beam vs 40Mhz clock phasing measurement  

Activities:

9:21  Started Run 460 with both RD53a. Same rate as yesterday.

9:56  Ended 460 with 10K events. Started 461.

10:30 Ended 461 with 10K but there was an event mismatch that killed all connections but the monitor and log collector. Run was terminated and restarted.

10:32 After run control was restarted, started Run 462.

 

Data summary:

RunStartEnd time#eventsRD53a DUTParticle rateComments
4609:219:56

10K

C,D4.6 / 1.1Start Day shift with beam setup as yesterday
4619:5610:3010KC,D After this run all connections but the monitor and log collector died and the next run was not autostarted. Saved data from run 461, terminated processes, and restarted.
46210:32  C,D