Page History
...
- send escape right away after powering up
- datamode: using medium 8bit
- framemode: our camera only gives a line valid (indication that there is valid data) so we need to set to "line"
- tapcount: our camera sends 4 bytes where it could send 6
- dataen: enables the data block (leave false until able to receive data)
- baudrate: 9600
- use sendGCP to test serial link is working (output should appear on terminal)
- swcontrolvalue/swcontrolen: bits for hardware vs software trigger (0/0 internal trigger)
- running: status bit (am I getting frames from camera)
- dropcount: 3 channels misaligned (errors)
- have to set both sender/receiver to "medium". send these TLC strings to the camera:
- CLM 1 (cameralink medium mode)
- SVM 1 (test pattern ramp)
- SSF 1 (software trigger rate 1Hz, although seems to read back as 6Hz? and 2 reads back as 12Hz?)
Camera output should appear on terminal after setting ClinkTop->ChannelA->DataEn to True
Output of SendGCP:
Code Block |
---|
Got Response:
Got Response: Model P4_CM_02K10D_00_R
Got Response: Microcode 03-081-20296-13
Got Response: CCI 03-110-20294-03
Got Response: FPGA 03-056-20470-03
Got Response: Serial # 12102856
Got Response: BiST: Good
Got Response:
Got Response: DefaultSet 1
Got Response: Ext Trig Off
Got Response: Trig Overlap Off
Got Response: Line Rate 1 [Hz]
Got Response: Meas L.R. 6 [Hz]
Got Response: Max L.R. 19607 [Hz]
Got Response: Exp. Mode Timed
Got Response: Multi Exp. Mode Off
Got Response: Exp. Time[0] 50000 [ns]
Got Response: Meas E.T.[0] 50000 [ns]
Got Response: Max E.T. 3000500 [ns]
Got Response:
Got Response: Test Pat. 1:Ramp1
Got Response: Direction Internal, Forward
Got Response: TDI Stages 2
Got Response: Vert. Bin 1
Got Response: Hor. Bin 1
Got Response: Flat Field Off
Got Response: Offset 0
Got Response: System Gain 1.00
Got Response: Mirror Off
Got Response: AOI Mode: Off
Got Response: Scan Type Line Scan
Got Response: CL Speed 85MHz
Got Response: CL Config Medium
Got Response: Pixel Fmt 8 bits
Got Response: CPA ROI 1-2048 |
Overview
Content Tools