...
- When the daugther board is plugged in, the total power draw is about 10W (+12VDC @ 0.8A)
- Carrier Board is ~5W
- Digital Daughter board is ~5W
- To prevent the boards from overheating, we require cool air to be blown from a fan
- Using a thermal electric cool on the ASIC would be an acceptable thermal management solution as well
- The image below is the carrier board's input power circuit :
- The mating connector to the carrier board's power connector is "MOLEX 39-01-3042" and the pinout is:
- PIN1 = PWR (+12VDC)
PIN2 = PWR (+12VDC)
PIN3 = PWR_RTN (GND)
PIN4 = PWR_RTN (GND)
![](/download/attachments/219260002/InputPwr.png?version=1&modificationDate=1485291115000&api=v2)
PGP/ETH (Required)
- This SFP interface is the PGP or ETH (depending on which firmware is loaded)
- When ETH firmware is load:
...
{"serverDuration": 47, "requestCorrelationId": "8b2eb27a5c9e584e"}