...

Open vivado.

Flash PROM Instructions

In hardware manager, there's a green bar at the top under the toolbar, it should say "No hardware target is open."

...

Right click on "xc7a", select "Add Configuration Memory Device"

Then in the search box, type "28f00ap30t", it should filter down to a single item

Go to "Program Configuration..."

Choose the configuration file or "image" that you want to flash with. Should be a .mcs file.

Flash FPGA Instructions

In hardware manager, there's a green bar at the top under the toolbar, it should say "No hardware target is open."

Next to that "Open  (new hardware) Target"

Connect to "local server". (=> says "connecting to the server")

New window showed up, "Open New Hardware target" looks like we don't change anything there? It shows hardware target and hardware devices (one each)

Top one should be xilinx_tcf, underneath "xc7a..." and  underneath that "XADC"

Right click on "xc7a", choose "Program Device"

Choose the "image" that you want to flash with. Should be a .bit file.

Flashing the Data DPM's

Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/).  The Data DPM firmware can be loaded as follows:

...