...

Open vivado.

Go to hardware manager

[2/25/16, 10:01:34 AM] Benjamin Reese: in In hardware manager, there's a green bar at the top under the toolbar
[2/25/16, 10:01:51 AM] Benjamin Reese: It , it should say "No hardware target is open."[2/25/16, 10:02:05 AM] Benjamin Reese: and next

Next to that "Open  (new hardware) Target"

Connect to "local server". (=> says "connecting to the server")

New window showed up, "Open New Hardware target" looks like we don't change anything there? It shows hardware target and hardware devices (one each)

Top one should be xilinx_tcf, underneath "xc7a..." and  underneath that "XAD"

Right click on "xc7a", select "Add Configuration Memory Device[2/25/16, 10:02:11 AM] Vitaliy Fadeyev: should we "open a new hardware target" ?
[2/25/16, 10:03:05 AM] Benjamin Reese: yeah, go ahead and do that. I guess we'll just give it a try with the power plugged in. It might just work
[2/25/16, 10:03:45 AM] Vitaliy Fadeyev: should we connect to "local server" or "remote server" ?
[2/25/16, 10:03:54 AM] Benjamin Reese: local server
[2/25/16, 10:04:14 AM] Vitaliy Fadeyev: says "connecting to the serve"

Flashing the Data DPM's

Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/).  The Data DPM firmware can be loaded as follows:

...