Flashing FEB's through PGP
Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/). Once that's done, log in as root into dpm7 and kill the rceServer (use ps to find the process ID). The firmware can then be loaded onto a FEB as follows:
Code Block |
---|
|
cd /mnt/host/daq
./bin/xPromLoadRce <FebFpga> /mnt/home/rherbst/svt_firmware/projects/Feb/images/Feb_<version>.mcs
|
Warning |
---|
- When writing and verifying, the prom progress always finishes at 35%.
- The program always ends with a segmentation fault. This doesn't mean that the image wasn't loaded properly.
|
Flashing the Data DPM's
Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/). The Data DPM firmware can be loaded as follows:
Code Block |
---|
|
cd /usr/clas12/release/0.2/slac_svt/svtdaq/daq
./rceScripts/set_image_data.sh /mnt/home/rherbst/svt_firmware/projects/DataDpm/images/DataDpm_<version> |
Flashing the Control DPM
Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/). The Control DPM firmware can be loaded as follows:
Code Block |
---|
|
cd /usr/clas12/release/0.2/slac_svt/svtdaq/daq
./rceScripts/set_image_control.sh /mnt/home/rherbst/svt_firmware/projects/ControlDpm/images/ControlDpm_<version> |